Instruction Manual

6
English Instruction Manual
For FM reception there is a 75ohm FM antenna
socket (22)
move around to obtain the best reception signal.
1. Switch ON the MODE/STANDBY BUTTON (10). The Display (19) will light up.
PRESET MEMORY FM
1. When selected the desired station, press and hold the PRESET BUTTON for 2 seconds.
2. The display show “MEMORY P01”, press UP F.F or DN F.R button to select the desired
preset FM station, then press the TUNER/PRESET(18) or PRESET(32) to store the station.
2. Press sequentially the MODE/STANDBY BUTTON (9) to select the FM Radio.
Tune to the desired radio station by turning the TUNER/PRESET KNOB (17).
1. During FM working mode, press PLAY/PAUSE button on the unit or the remote will auto-
scan all of FM stations and will save automatically.
2. Press and hold UP F.F or DN F.R button for 2 seconds on the unit or the remote start auto scan
mode, if stereo FM station received, ‘Stereo’ will show on the LCD and will stop auto scan but enter
3. Move around the FM antenna(22) to get the best reception.
ANTENA
OPERATION
AUTOMATIC TUNING
MANUAL TUNING
FM RADIO OPERATION
and insert the antenna into the socket,
into the playing mode.
3. Repeat above step 1 and step 2 to save total
10 stations.
4. To play the preset stations, press UP F.F or DN F.R button or presse PRESET on the remote.
PHONES FUNCTION
1. During playing mode, insert the earphone (not
include) into the phones jack(5) .
2. The built-in speakers will be disconnected when the earphone are plugged in.
3. Lower the volume during listening by the earphone to avoid damage your ears.
AUX IN FUNCTION
1. Press MODE/STANDBY(10) button to choose AUX mode.
2. Insert the 3.5mm Aux in cable (not include) int
o the AUX jack(6), connect the other end of the
cable to your device (like your mobile phone, MP3 play, etc).
3. Adjust the volume using the Volume control knob (17) and play your device as normal.
During playing mode, press the Remote Control MUTE BUTTON (42) one time, the sound will not
be heard from the speakers and “MUTE ON” will show on the display; press the MUTE BUTTON
(42) or rotate the VOLUME KNOB (17) to cancel mute function and the sound can be heard again
from the speakers. During playing mode, press the EQ BUTTON (26) to choose from different
sound effect among POP/ CLASSIC/ ROCK/ JAZZ / FLAT.
MUTE / EQ OPERATION