Manualshelf

Full Product Manual

ManualsBrandsInnovative Technology ManualsElectrical6-in-1 Empire Mid Century Modern Bluetooth Record Player with 3-Speed Turntable, CD, Cassette Player and Radio
12345678910
9
5. After that the number of tracks will show on the display and it will begin to playback
from the first track automatically.
6. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume.
7. To return to the previous or skip tracks, press the corresponding button ( or ). Pressing
once will restart the current track. Pressing twice in succession will return to the
beginning of the previous track.
8. To Fast Forward / Rewind within a track, press and hold down the corresponding skip button until
the desired position is reached.
9. To stop playback, press the STOP button
Important:
- Never place more than one disc on the tray.
- The disc must be placed in the center of the disc tray. An incorrectly
loaded disc can permanently damage the tray door mechanism.
- Do not push the CD tray – always use the OPEN/CLOSE button.
- It takes a moment for the unit to load a disc, during which all buttons will be temporarily
deactivated.
Repeat Playback
Each time the REPEAT button is pressed, the repeat mode will cycle through the following options:
REPEAT ONE (Repeat one track)
The “REPEAT ONE” icon will appear on the display and the current track will be played
repeatedly. If you press the ( or ) button to select another track, the track you
select will be played repeatedly.
REPEAT ALL (Repeat the entire CD)
The “REPEAT ALL” icon will show on the display and the entire CD will be played repeatedly.
SHUFFLE
The “SHUFFLE” icon will appear on the display. Playing the tracks on a CD mode
in a random sequence.
Notes:
- Repeat playback works with CD discs only.
- Pressing ( ) during shuffle playback will randomly select the next track.
- A track cannot be repeated during shuffle playback.
- Shuffle playback doesn’t work during programmed playback.
To cancel the REPEAT or SHUFFLE mode, press the REPEAT button repeatedly till the right side
icon disappear from the display.
Programmed Playback
Up to 20 tracks can be programmed to play in the desired order.
Notes:
- Programmed playback works with CD discs only.
1. Select “CD” mode, then load a CD.
2. While the CD is stopped, press the PROGRAM button.
3. “PROG” indicator lights up and “P01” blinks on the display.
4. Press ( or ) to select a track number.
5. Press the PROGRAM button again to set the next program track, “P02” appears and blinks.
Repeat steps 4 through 5 to program the additional tracks.