User Manual

Innovative Material-Cart

™

Assembly Instructions

Install Upper Back Frame P/N 730-014 using

1/4" x 2" bolts with corresponding nuts/washers.

Tighten all hardware.

Install Total-Lock Caster Wheels P/N 730-000

into Side Frame P/N 730-011.

Bolt Crosstube P/N 730-012 to Side Frame using

1/4" x 3/4" bolts and washers. Repeat for other side.

(Note: All hardware finger-tight until final step.)

Lay Material Cart flat with Crosstube on floor.

Install top shelf using only 1/4" x 3/4" bolts

and washers. (Note: smaller wire on top

side of shelf.)

Repeat step #3 for middle and bottom shelf. Install

1/4" x 2" bolts with corresponding nuts/washers.

(Note: middle shelf not included if Material Cart was

ordered with Masker Option.)

Install Upper Side Frame P/N 730-013

using 1/4" x 2" bolts with corresponding nuts/washers.

Repeat for opposite side.

PAGE 1
Innovative Material-Cart™ Assembly Instructions 1 Install Total-Lock Caster Wheels P/N 730-000 into Side Frame P/N 730-011. 3 Lay Material Cart flat with Crosstube on floor. Install top shelf using only 1/4" x 3/4" bolts and washers. (Note: smaller wire on top side of shelf.) 5 Install Upper Side Frame P/N 730-013 using 1/4" x 2" bolts with corresponding nuts/washers. Repeat for opposite side. 2 Bolt Crosstube P/N 730-012 to Side Frame using 1/4" x 3/4" bolts and washers. Repeat for other side.
PAGE 2
Exp 1.1 Hex Head Bolt 1/4" x 2" Qty: 14 Hex Head Bolt 1/4" x 3/4" Qty: 8 Shelf 730-010 Qty: 2 Crosstube 730-012 Qty: 1 Upper Back Frame 730-014 Qty: 1 TM Upper Side Frame 730-013 Qty: 2 Masker Option I-MO Qty: 1 Side Frame 730-011 Qty: 2 Exp 2.1 www.innovativetools.com Innovative Material-Cart with Masker Option 8.5 Exp 8.