Owner's manual

Innovative X-Stand
™
Assembly Instructions
Insert wheels, tighten with
3/4
 hand wrench.
www.innovativetools.com
Use 3/8 bolts to connect lower
support tube to frame support tube.
Tighten firmly with 9/16
 wrench.
Install I-bolts using 1/2
 hand wrench.
Connect frame support tubes using
3/8
 x 3/4 bolt and nylon lock nut.
Note: use flat washer between frame
support tubes. Do not overtighten.
Insert right and left adjustment tubes.
Tighten T-bolt
.
1 2 3
4
5
Install panel rest assembly using
3/8
 shoulder bolt with two flat washers
on each end and nylon lock nut.
Note: do not overtighten
.
6
Adjustment tubes can be raised and lowered as well as turned inward depending on your application.