User's Manual

FOR OFFICIAL USE ONLY 5
o A solid green indicates that the device is active and the radio is enabled and will actively seek a
mesh network (higher power drain condition).
e) Verify the environmental seal track is free of dirt and debris. If necessary, use compressed air to clean
out the track.
f) Insert the environmental seal in the seal track or re-insert it as necessary if it has popped out of the
track at any point.
g) Arrange the cables such that they do not impede lid closure.
h) Screw the lid back on (NOTE: The recommended rotational torque on the outside lid screws is 20-
25 in-lbs.)
Screws (a)
Batteries Connected (c)
Open & Empty
Environmental Seal Installed (e)
Batteries Inserted (b)
Batteries Installed
Figure 3: Battery installation process