User's Guide

Revised: 11/24/2020 6650-20-0014, Rev. A
Approval: Page 10 of 13
Figure 6 – Wi-Fi AP Configuration Screen
The last four digits of the SSID match the ID of the individual ILB device (labeled on enclosure).
The Passphrase is the network security key used to connect to the device. The default Passphrase for
each ILB is Beacon123. To change the SSID or Wi-Fi Passphrase, enter new values in the text box and
press the Update button at the bottom of the screen. The update may take up to 30 seconds.
The BLE BEACON screen includes information necessary to configure the Bluetooth Low Energy beacon: