User's Guide

Revised: 11/24/2020 6650-20-0014, Rev. A
Approval: Page 11 of 13
Figure 7 - BLE Beacon Configuration Screen
The ILB’s BLE beacon is Disabled by default. To enable the Bluetooth beacon, select the desired Beacon
type (iBeacon or Eddystone) and press the Update button at the bottom of the screen. If the beacon is
not detected, power cycle the device.
The Bluetooth UUID may be changed by entering a new value and pressing the Update button at the
bottom of the screen. Note: The default UUID is the same for all ILBs.
Selecting the ETHERNET tab opens a screen with information pertaining to an Ethernet connection to
the device.