User's Guide

Revised: 11/24/2020 6650-20-0014, Rev. A
Approval: Page 12 of 13
Figure 8 - Ethernet Configuration Screen
If the ILB is connected wirelessly to a laptop/tablet/phone for configuration, the IPv4 Address and
Netmask boxes will indicate ‘None’ as in the figure above.
6. INSTALLATION
IMPORTANT! TRAINED PERSONNEL MUST PROFESSIONALLY INSTALL THE ILB.
6.1 SITE SURVEY
Conduct a survey to determine the appropriate sites to install the ILBs.
6.2 MOUNTING AN ILB
The ILB may be mounted to a wall or ceiling tile using four ‘blind’ mounting holes. The mounting holes
are accessed by lifting the flaps on the enclosure lid as shown in Figure 9.