User's Guide

Revised: 11/24/2020 6650-20-0014, Rev. A
Approval: Page 4 of 13
 increase the separation between the equipment and receiver;
 connect the equipment into an outlet on a circuit different from that to which the receiver is
connected; or
 consult the dealer or an experienced radio/TV technician for help.
2.1.2 FCC Allowable Limits for General RF Exposure
CAUTION! To ensure that exposure to RF electromagnetic energy is within the FCC allowable limits for
general RF exposure, always adhere to the following guidelines:
 The antennas used for the ILB transmitters must not be co-located or operating in conjunction
with any other antenna or transmitter.
 The ILB must be installed 20 cm or more from any personnel in order to comply with FCC
exposure requirements.
2.2 MODIFICATIONS
Changes or modifications to the ILB not expressly approved by Innovative Wireless Technologies, Inc.
may void the user’s authority to operate this equipment.
3. SPECIFICATIONS FOR FAP5030-030
(Typical unless otherwise specified)
PHYSICAL & ENVIORNMENTAL
Operating Temperature
-20C to +60C
Operating Humidity
15 to 95%, non-condensing
Dimensions
5.5” x 4.3” x 2.3”
Weight
1 lb
Enclosure Protection
IP54
Wi-Fi
Bands
2.4 GHz
Standards
802.11 b/g
Beacon Interval
100 msec
Transmit power
20 dBm
BLUETOOTH®
Note: BLE Beacon is disabled in default configuration.
Bands
2402-2480 MHz
Standards
4.0, 4.1, 4.2