WATERPROOF SPORTS CAMCORDER Ref.
FUNCTIONS Thank you for purchasing this camera. In virtue of high performance chip applied, this product features high definition video with strong continuous dynamic images. The images support AVI video format, and thus clear pictures can be achieved. This device adopts a unique and super portable design, which benefits a convenient, safe and colorful daily life for you in various fields. Please make sure to carefully read this manual and keep it properly for future reference.
In case of dirt or dust accumulated on the camera or lens, clean them with a piece of soft, clean and dry cloth. In case of sand on the camera or lens, it is to gently blow the sands off. Do remember not to clean it a piece of cloth. Otherwise, surface of the camera or lens may be damaged; To clean surface of the camera lens, it is firstly to blow off the sands on it, and then clean it with a piece of mop or paper suitable for optical instruments. If needed, please clean camera with cleanser.
• Do not use the device near water or let it come into contact with moisture. • The device must not be exposed to dripping or splashing water, and no object containing liquid should be placed on the device. • Make sure that no liquid can be spilled in the device openings. • Move the machine with care, and avoid shocks. • Do not obstruct the ventilation with items, such as newspapers, tablecloths, curtains, etc. • Do not install the device near a heat source (e.g. a radiator) and do not expose it to the sun.
Note: There is a risk of explosion if battery is incorrectly replaced: the battery must be replaced by an equivalent type. • If any replacement is necessary, please contact a qualified technician or the manufacturer for service. • Do not expose the battery to excessive heat such as sunshine, fire, a radiator or similar sources. • The user should not manipulate the device beyond what is described in this manual. Otherwise, the warranty shall be void.
Support max. 32GB TF card; No internal memory; This product adopts loop coverage recording method and the new recording can automatically cover the former images achieving an endless rolling recording; This product is equipped with on‐site replay function. You may check the video recorded on‐site with the display. It also supports replay with computer.
APPEARANCE AND KEY INTRODUCTION Mode switch: ‐Photograph ‐Video ‐Replay Lens Power On/Off Shutter Operation indicator Charging indicator Up key LCD TFT OK key Down key 7
Key/Indicator Power On/Off Shutter Up key OK key Down key Mode switch Operation indicator Function Power the camera on or off. When opening the menu, switch over between normal (effect parameters and replay of image, video) and setup menu. In recording video mode, it is used to start/stop recording; in capture mode, it is used as a shutter; it is used to play the video (in replay mode); confirmation (when operating the menu).
START USE _______ 1. Charge built‐in lithium battery Charger indicator lights USB 线 In power‐off state, when the camera is connected with computer, charging begins. At this time, the charger indicator lights and it turns off when charged full. Generally, it costs 2‐4 hours to charge full. 2. Use memory card 1.
2. To take the FT card out, after gently pressing the end of the memory card inwards, the card will reject out; Note: The camera is not equipped with a built‐in memory, and thus a memory card is required. 3. Power On/Off: 3.
3.2. Power‐off: In idle state of the camera, if to click POWER key, the camera turns off; Automatic power‐off: When idle time set for the camera reaches, it automatically turns off to save power. The default time of the system automatic power‐off is 5 minutes; ”shown on the 3.3. Power‐off due to low battery: In case of extremely low battery, an icon of “ LCD screen. Please timely charge the battery. When the icon turns red and flashes, the camera will automatically power off. 4.
6. Video mode When pushing Mode switch to video mode, click shutter in preview state to start recording video; to stop video recording, it is to click it again.
In the main menu, press shutter key to exit from the menu. ▲Video menu Video menu options Main menu Video format Sub‐menu 1280x720 640X480 Off 1min Recording int 3min 5min Metering mode Central metering Description High resolution format Medium resolution format Power‐off driving record Set driving record to 1 minute as a repeating phase. Set driving record to 3 minutes as a repeating phase. Set driving record to 5 minutes as a repeating phase.
Multi‐point metering Spot metering Automatic White balance Daylight Cloudy Fluorescent light Tungsten light Normal White and black Sepia Special effect Date stamp Negative film Metering subject to multi‐points Metering subject to one point Using automatic white balance, suitable for most cases; Suitable for daylight environment Suitable for cloudy environment Suitable for fluorescent light source environment Suitable for tungsten light source environment Normal effect White and black effect Retro effec
Date and time During capturing/recording video, print date and time on right bottom corner of the file 7. Driving video recording: Push Mode switch to Video mode, open the menu, press Down key to select “Recording Int” menu, press OK key to enter sub‐menu, “1min, 3min, 5min” recording loop mode are for free selection. After pressing OK key for confirmation, press shutter key again to exit from the menu. When Shutter is pressed, it starts video recording.
Note: After selecting OFF in “Recording Int” menu, when existed from the menu, the camera turns to normal video recording. Normal recording is beyond the limit of time, and it will not stop until the memory card is full. 8. Capture mode: Push Mode switch to Capture mode. Press Shutter once in preview state or click center of LCD for a picture taken: 1. 9999: Counter: indicates quantity of pictures taken or available to be taken; 2. : mode icon: indicates it is currently the mode of capture; 3.
sub‐menu. In sub‐menu, press Up and Down key for selection, press OK for confirmation and back to main menu. In the main menu, press shutter key to exit from the menu.
Cloudy Fluorescent light Tungsten light Exposure Capture mode / Off Use general single shot mode 2s Use 2sec. delay self‐timer mode 10s burst Use 10sec.
Date Date and time During capturing/recording video, print date on right bottom corner of the file During capturing/recording video, print date and time on right bottom corner of the file 9. Playback mode: 9.1 After power‐on, push Mode switch back to Playback mode: 1. 2. 3. 4. 9.
▲Playback menu Playback menu options Main menu File lockup File deletion Slide show Sub‐menu Lock/unlock this file Lock all Unlock all Delete this file Delete all Start Interval Repeat Description Lock/unlock this file Lock all files Unlock al files Delete the current file Delete all files Start playing slide show 1sec.~10sec.
9.3 Play movie clips: During playing, press Shutter key to play, press Up key for pause, press OK key to stop playing. 9.4 Delete file: 1) After selecting the file to be deleted, open the menu, press Up and Down key to select “Delete…”.
2）Press OK key to enter, after selecting “One”, press OK key for confirmation). “All” means to delete all files.) 3) After selecting “Yes”, press OK key to delete the file. When the file is deleted, press shutter key to exit from the menu. 10. System setup menu: In capture, video recording or playback mode, press OK key to open menu, and then press Power key to switch over to setup menu. In setup menu, press Up and Down key for selecting menu.
▲System setup menu System setup menu options Main menu Automatic playback Power frequency Power save Sub‐menu Off 1 second 3 seconds 50Hz 60Hz 1 minute 3 minutes 5 minutes OFF Description No playback performed after capture Playback performed 1 second later after capture Playback performed 3 seconds later after capture Se to 50Hz light source frequency Set to 60Hz Playback performed 1 second later after capture Automatic shutdown performed in case of 1 minute idle Playback performed 3 seconds later afte
Date and time / Language Set up date and time format Set up the menu language as English/French/Spanish/ Italian/Portuguese/German/Russian/Japan/Simplified Chinese / Default to French Format Reset all Yes/No Yes/No Format memory card Back to default value Setting date and time: Press OK key to open the menu, and then press Power key to enter setup menu. Press Down key to select “Date&Time” item, and press OK key to enter setup window.
Finally press OK key to exit from setup mode. APPLICATION IN PC _______ 1. Connect with PC The camera is equipped with function of plug and play. In power‐in state, after connecting this device to the computer with USB cable, it can be switched over to portable hard disk mode. Portable hard disk icon will be shown in the window of “My Computer”.
When AMCAP software is not opened, video can be transmited through network by using camera function. Make sure that Preview is selected in Option menu.
INSTALL DRIVER AND SOFTWARE The accessory CD contains camera driver and User Manual. Installation interface Insert the accessory CD into CD‐ROM of the computer. The system will automatically run the installation procedure in the CD. The screen will show installation guide as shown in the figure below: (It may cost several seconds to run the installation driver depending on performance of the computer. If the installation window is not shown, please open “My Computer” to run in the CD.
After completion of driver installation, restart the computer Please click “User Manual” key in the installation guide window for using method.
TECHNICAL PARAMETERS Video resolution LCD display Digital zoom Lens Shutter 3 Mega Pixels (2048×1536) and 5 Mega pixels (2592×1944) by extrapolation VGA: 640x480 (60 frame/second); 720P:1280x720 (30 frame/second) 1.8” TFT screen X4 F3.1 f=6.5mm Electronic shutter White balance Automatic /Sunny / Cloudy / Fluorescent light / Tungsten light Exposure Function mode ‐2.0 ~ +2.0 Video, capture, car mode, portable disk (insert TF card), PC camera Video AVI Image JPEG TF card (Max. support 32GB).
STANDARD PACKAGE Camcorder User Manual USB cable 30 Installation CD
DETAILS AND PRECAUTIONS ON THE USE OF BATTERIES ‐ Discard a used battery in nature or garbage pollutes and prevents the recovery of recyclable materials. It is therefore important to limit consumption of batteries and follow these guidelines: • Focus on alkaline batteries (that last longer than the saline batteries) and when possible, rechargeable batteries deposit batteries and accumulators in specific containers arranged among traders.
leak and cause damage. ‐ Never try to short‐circuit the battery terminals ‐ Never dispose of batteries in fire, they might explode ‐ Charging of batteries is to be performed by an adult. ‐ Remove batteries from the device before reloading. ‐ We recommend an adult to supervise children when they change the batteries so that these instructions are complied with or to make himself the replacement of batteries. ‐ If a battery is swallowed, immediately consult a doctor or poison control center nearest you.
