User's Manual

Doc.: HD0389-00-Manuale_TL_GWCxxxx_r.0.1_EN.doc-00 17/04/2011 Page 21 of 49
3.2. User parameters: dip-switches setup
Locating
dip-switches
DIP1 contacts can be used to perform some user setup, such as:
• CANBus node id setup
• CANBus baudrate setup
• User functions setup
DIP1 contacts are accessible from front side of the GWC device.
Dip-switches functions are defined by software; please refer to
the Software Manual for detailed information