User's Manual

Doc.: HD0389-00-Manuale_TL_GWCxxxx_r.0.1_EN.doc-00 17/04/2011 Page 23 of 49
3.4. Device fitting
Environment The environment where the GWC device will fit should be clean, with no
corrosive vapours, gases, or liquid.
Please avoid device fitting in places where vapours or humidity should
condense.
By fitting the GWC device into a cabinet, please be sure that the air flow
or the cooling system should be sufficient to keep GWC device
temperature below its maximum temperature ratings.
Current laws on safety must be considered as a design requirement for
the device installation.
Installation
guide
Device installation should satisfy at least following requirements:
• Keep device vertical;
• Avoid excessive vibrations or mechanical shocks;
• Leave enough free room to allow air flows on device top and
bottom
Cooling
Device cooling is guaranteed by its metal box surfaces; please optimize
thermal flow between those surfaces and the environment so that
internal temperature is always kept below its maximum temperature
ratings.