User's Manual

Doc.: HD0389-00-Manuale_TL_GWCxxxx_r.0.1_EN.doc-00 17/04/2011 Page 29 of 49

Please refer to section A.2 for further information about DC power

supply sizing.

Protections

Protections should be realized by mean of a delay fuse or an automatic

protection switch. Sizing of those devices depends upon current sunk

by connected DC loads.

Dissect mains from transformer primary circuit.

Power supply must not exceed connected loads allowed range.

Please refer to section 5 for further information about your specific

GWC device power supply allowed range.

Wiring

requirements

Please use a wire having 0.5mm

or greater section (#21 AWG) to

connect V+ and V- terminals.