User's Manual

Doc.: HD0389-00-Manuale_TL_GWCxxxx_r.0.1_EN.doc-00 17/04/2011 Page 31 of 49

3.5.4. CN3: DeviceNet (or CanOpen #2) connection

Can Bus CN3 is a PHOENIX mini-COMBICON 1803303 5-poles male

connector.

If used as CANOpen#2 please refer to §3.5.3 CN2: CanOpen

connection #1 for more information about connection table and wiring.

Please refer to software manual for further information about how

GWC device works when in DeviceNet or CAN bus mode.

Connection

table

Signal Pin Function

DNET_V- CN3.1 DNET_Ground

DNET_L CN3.2 DNET CAN_L signal

DNET_SHIELD CN3.3 DNET_ Shield

DNET_H CN3.4 DNET CAN_H signal

DNET_V+ CN3.5

DNET Positive Supply

Wiring

requirements

Please use cables compliant to DeviceNet association requirements

for DeviceNet connection.

Please use twisted wires having 0.5mm

(#20AWG) or 0.25mm

(#23AWG) section for CAN bus connection.

DNET_H

DNET_V-

1 DNET_V-

2 DNET_L

3 DNET_SLD

4 DNET_H

Phoenix mini-combicon 1803604

5-poles female 3.81m

5 DNET_V+

DNET_L

DNET_V+