User's Manual

Security Section 2
2
-8 APTIO - Operations Manual
799.007.203.0— February 2011
Installation Specifications
The FlexLab 3.6 Automation system must be installed by a qualified Inpeco
representative.
System installation includes a complete checkout to ensure the equipment is fully
operational.
This equipment is intended only for internal use.
Bar Code Reader Lasers
The Automation system has one or more Bar Code Readers emitting laser beams. All bar
code reader laser beams are protected by means of a metallic shield. There are no laser
beams that are accessible and visible to the operator. Laser beam metallic shields must be
left in place.
Moving Parts
Due to the necessity to insert the sample tube racks in the Automation system modules
(i.e.: IOM, RIM, etc) there are moving parts that are unavoidably exposed during the
normal use. Automation system operators should be adequately warned and trained. The
residual potential risk is mitigated by means of warning labels.
Equipment Protection
If the equipment is used in manner not specified in this Operations Manual the protection
provided by the equipment may be impaired.
FCC warning statements
This device complies with Part 15 of the FCC rules subject to the following two
conditions:
1) This device may not cause harmful interference
2) This device must accept all interference received, including interference that may cause
undesired operation.
The antenna CANBUS antenna wirings incorporated in this equipment has been modified
to comply with the Part 15 of the FCC rules.
Ferrite Fair Rite 046117645 Bin H4 has been added on transponder cables.