Specifications

FL-MDS-CAB.2
MOD-MDS.1 ***Confidential*** 22 of 28
0x2001
3
status_ AB_crc
UNSIGNED8
RO
latest CRC on AB (0 if rack tag)
0x2001
4
status_ AB_error
UNSIGNED16
RO
latest error code AB
0x2001
5
status_ AB_counter
UNSIGNED64
RW
number of decoded Ids on AB
Note: on the single antenna version the AB entries will contain always zeroes.
Inpeco Node Info
Index
Subindex
Name
Type
Access
Description
0x2803
1
node_info_node_command
UNSIGNED16
RO
Inpeco node command
0x2803
2
node_info_node_status
UNSIGNED16
RO
Inpeco node status
0x2803
3
node_info_node_error
UNSIGNED16
RO
Inpeco node error
HTRC110 / decoding configuration parameters
Index
Subindex
Name
Type
Access
Description
0x4000
1
sampling_time
UNSIGNED8
RW
Sampling time 0 – 63
3
0x4000
2
hysteresis
UNSIGNED8
RW
Hysteresis on/off
3
0x4000
3
gain
UNSIGNED8
RW
Gain
3
0x4000
4
hipass
UNSIGNED8
RW
Hipass freq
3
0x4000
5
lopass
UNSIGNED8
RW
Lopass freq
3
0x4000
6
moving_window_on
UNSIGNED8
RW
Moving windows algorithm
on/off
1
0x4000
7
interval_tol
UNSIGNED8
RW
signal interval tolerance
width in µs
2
0x4000
8
calib_request
UNSIGNED8
WR
Sampling time calibration
request
Notes:
1. The parameter at index 0x4000/6 (moving_window_on) selects the bit decoding algorithm. The
moving window algorithm checks continuously the newest bytes received from the HITAG,
attempting to decode them as an Inpeco carrier or rack tag. The value 0 selects the accumulation
algorithm: the bits sent by the tag at each transmit cycle are accumulated, relevant bytes are
checked for compliant decoding in the two standards (rack/carrier).
2. This is the tolerance for the time between two signal edges during decoding.
3. Read HTRC110 datasheet and application note documents to know how the parameters at
subindexes 0x4000/1-5 influence the HTRC110 behavior.