User's Guide

Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1

User Guide, Inpixon 5000

Dated: June 25, 2020

The content of this document is to be treated as strictly confidential and is not to be disclosed,

Reproduced or used, except as authorized in writing by Inpixon

Page 4 of 6

3 System Description

Inpixon 5000 combines Cellular, Wi-Fi, Bluetooth and ultra-wide band (UWB) sensors to provide a broad

range of RF device detection. A single board computer (SBC) powers, controls, and communicates with

the sensor boards to receive and process detected RF signals. Post-processed data is then communicated

with a remote system by way of Ethernet connection. The system is powered by 24VDC or 802.3af/t PoE.

The active transmitter – UWB – integrates the Decawave DW1000 chip and supports 6 ultra-wide band

channels (as per IEEE802.15.4-2011) (the firmware limits active transmissions to channel 2 and channel

5). The DW1000 supports UWB standard bit rates of 110 kbps, 850 kbps and 6.81 Mbps and nominal

Pulse Repetition Frequencies (PRF) values of 16 MHz and 64 MHz.

Cell Sensor

Wi-Fi

detection

Bluetooth

Detection

UWB

Radio

INPX-400

SBC

i.Mx7