Installation Manual

V. Installing the JK2001
Before proceeding with the installation, vehicles with the OEM Alpine
Premium Sound System will need to make a minor change on your
new Insane Audio wiring harness.
12
F2
F1
R2
R1
6061E
If your vehicle is not equipped with the OEM Alpine Premium Sound
System or if you are using your own aftermarket amps and speakers
you do not have to make any changes. F2 should be connected to F1
and R2 should be connected to R1 as shown above.
If you DO have the OEM Alpine Premium Sound System, you will need
to swap the speaker quick connect wires above. Simply connect F2 to
R1 and R2 to F1 and you’ll be good to go!