User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Troubleshooting and Support
- 5 Product Specifications and Regulatory Information
- 6 Glossary
5G FG2000 INDOOR ROUTER USER GUIDE 67
Custom Applications
You can define up to ten custom applications.
Add custom application: Use this button to add a new row to the custom application list.
On: Check this box if you want the new application to be able to access the Internet.
Application Name: Enter a name for the custom application.
Start Port: Enter the beginning of the range of port numbers used by outgoing traffic for the
custom application being added.
End Port: Enter the end of the range of port numbers used by the application.
NOTE: If the application uses a single port instead of a range, type the same value for both the
Start Port and the End Port.
Protocol: Select the protocol used by the port range from the drop-down list (TCP, UDP, or
both).
Delete: Check this box to delete a custom application. NOTE: Click on the Port Filtering tab
again to remove deleted custom applications from view on the screen.
Click Save changes to save any changes made to the custom applications.