User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Admin User Interface
- 3 Troubleshooting and Support
- 4 Product Specifications and Regulatory Information
- 5 Glossary
5G FW2000 CPE USER GUIDE 18
Manual DNS Sub Tab
The FW2000 automatically selects a Domain Name Server (DNS). This page allows you to manually
assign up to two DNS IP addresses.
Manual DNS
Turn on manual DNS: Check this box to manually select a DNS.
DNS 1 IP address: Enter the IP address for the primary DNS. This address is required to use the Manual
DNS feature.
DNS 2 IP address: Enter the IP address for the secondary (backup) DNS. This address is optional and
may be left blank if desired.
Click Save Changes.