User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Admin User Interface
- 3 Troubleshooting and Support
- 4 Product Specifications and Regulatory Information
- 5 Glossary
5G FW2000 CPE USER GUIDE 19
SIM Sub Tab
The SIM card in your FW2000 can be locked using a PIN. If the SIM card is locked, you must enter the
PIN before connecting to the mobile network. Once entered, the PIN is remembered until the next
shutdown. You may also need to provide the existing PIN to change a SIM. The default PIN is available
from your service provider.
Use this page to unlock your SIM or enter a SIM PIN.
SIM Settings
SIM PIN Lock: Indicates whether the PIN lock feature is in use. If On, the PIN lock has been turned on,
and the SIM PIN must be entered to connect to the mobile network. If Off, the PIN lock feature is not
turned on and the SIM PIN is not required.
SIM status: The current status of the SIM card. Possible states include:
Ready – No SIM PIN is needed.
PIN Locked - SIM PIN must be entered before you can use the mobile network.
PUK Locked - PUK (personal unblocking key) for the SIM must be entered in order to continue.
The PUK can be obtained from your service provider.
Unlocked - SIM PIN was needed, but has already been entered.
No SIM - No SIM is detected. Check that the SIM is inserted correctly.
SIM Error - SIM is detected, but is not responding as expected and cannot be used.