User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Troubleshooting and Support
- 5 Product Specifications and Regulatory Information
- 6 Glossary
10
Installing Batteries
Your 5G Indoor Router uses AA batteries in the bottom of the router for the initial process of identifying
a location.
NOTE: You cannot run your FX2000 on batteries alone for Internet use, they are only used for
identifying the best location for your Indoor Router with the Inseego Connect App.
To install the batteries:
1. Slide the battery cover to the left and insert a fingernail at the edge to lift it out of place.
2. Insert three AA batteries following the diagrams on the router.
3. Replace the cover by pressing down and sliding it to the right.
4. Press the Power button on the router to turn it on for the location survey below.
Identifying a Location
Use the Inseego Connect App to identify the optimal location for your 5G Indoor Router.
1. Scan the QR code to install the Inseego Connect App from AppStore or Google Play, or visit
https://inseego.com/inseego-connect-get-app to download the App.
2. Follow instructions within
the Inseego Connect App to connect to your 5G Indoor Router and
perform a location survey to identify the ideal location for your 5G Indoor Router.
NOTE: Make sure to place your 5G Indoor Router on a sturdy surface.