User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Troubleshooting and Support
- 5 Product Specifications and Regulatory Information
- 6 Glossary
23
Primary Network Tab
Use these settings to connect initially to the primary Wi-Fi network or change primary network
information. Connected devices must use the Wi-Fi settings shown on this screen.
NOTE: If you change these settings, existing connected devices may lose their connection.
Settings
Primary network name (SSID): Enter a primary network name (SSID) to set up or change the primary
network name. The name can be up to 32 characters long.
Security: Select an option for Wi-Fi security:
WPA3/WPA2 Transition is the most secure method of Wi-Fi Protected Access and should be
used if possible for WPA2 and WPA3 compliant devices.
WPA3 PSK can be used for WPA3 devices.
WPA 3 Open Enhanced provides encryption and privacy on open
networks that are not
password-protected, and can be used for WPA3 devices.
WPA/WPA2 Mixed Mode can be used if some of your older devices do not support WPA2.
WPA2 AES PSK can be used for WPA2 devices.
Open allows others to monitor your Wi-Fi traffic and use your data plan to access the Internet.
NOTE: Avoid using this option.