User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Troubleshooting and Support
- 5 Product Specifications and Regulatory Information
- 6 Glossary
39
OpenVPN Tab
You can configure and enable OpenVPN with your 5G Indoor Router. If OpenVPN is connected, there is
no need for devices connected to the router to use their own OpenVPN client.
NOTE: When an OpenVPN connection is established, Port Filtering and Port Forwarding settings are
not effective, as traffic from all connected devices goes through the OpenVPN tunnel.
Auto-connect VPN: Use the ON/OFF slider to enable or disable auto-connect for the OpenVPN
connection.
VPN Connection
Connection status: Indicates the status of the OpenVPN connection.
Connect: Use this button to connect the OpenVPN.
View log: Use this button to view OpenVPN log files.
Connection time: The duration of the current OpenVPN connection.
VPN Settings
Set configuration file: Click Browse to navigate to a setup file.
Username: Enter a username.
Password: Enter a password.
Use the Clear all VPN settings or Save changes buttons to clear or save your settings.