User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Troubleshooting and Support
- 5 Product Specifications and Regulatory Information
- 6 Glossary
54
LAN Tab
This tab provides settings and information about the 5G Indoor Router’s local area network (LAN). The
LAN consists of the router and all Wi-Fi and Ethernet connected devices.
IPv4
IP address: The IP address for your 5G Indoor Router, as seen from the local network. Normally, you
can use the default value.
Subnet mask:
The subnet mask network setting for the 5G FX2000 Indoor Router. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address, make sure to
use the correct Subnet mask for the IP address range of the LAN IP address.
MAC address: (read-only) The Media Access Controller (MAC) Address for the Wi-Fi interface on your
5G Indoor Router. The MAC address is a unique network identifier assigned when a network device is
manufactured.