User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Troubleshooting and Support
- 5 Product Specifications and Regulatory Information
- 6 Glossary
60
Cellular Tab
In most configurations, the 5G Indoor Router is used with a dynamic IP and SIM and the Access Point
Name (APN) is available from the network, for example: internet. However, if you are on a private
network, you may need to set the APN on this tab for the network to communicate with the router.
Network Selection
Allow device to connect to the mobile networks: Use the ON/OFF slider when necessary to turn off
cellular data and prevent access to the mobile network. This prevents connected devices from
connecting to the Internet and using your 5G Indoor Router’s mobile data plan. For normal operation,
this setting must be left on.
Preferred Network Mode: Use the drop-down to select a mode (5G, 4G LTE, or Auto). If you select
Auto, your router automatically selects the best available network.
APN Setting
Internet APN: Enter the APN for your private network.
CAUTION! Changing the APN may cause a loss of data connectivity and disconnect you from the Web
UI.
Roaming
Allow domestic data roaming: Use the check boxes to allow or disallow access to the mobile
network when roaming.