User's Guide

64
Device List
This list includes all devices currently connected to the router, except those connected via Ethernet.
Add new device: Use this button to add a device to the device list, then enter the device name, MAC
address, choose whether to select the MAC Address Filter checkbox, and click Save changes.
To delete a device from the list, select its Delete checkbox and click Save changes.
To discard any unsaved changes and refresh the list, click Refresh list and Confirm.
Notes on Blocking Devices
There are two ways to block devices from connecting to the 5G Indoor Router:
• Temporarily block a device from connecting to the router via the primary and guest
networks and via Ethernet.
To use this method, go to the Connected Devices page and click the Block button next to the
device.
• Permanently block a device from connecting to your FX2000 primary network only. Use
the
MAC Filter.
When blocking devices, the following information applies:
 Devices blocked with Connected Devices > Block are blocked from the Wi-Fi network, even if
the MAC Filter is on and the device is enabled for the MAC Filter.
 If the MAC Filter is on, and a device is blocked with Connected Devices > Block, and is not
enabled for the MAC Filter, then it will not be able to connect. Both the MAC Filter and the Block
prevent connection.
 If the MAC Filter is on, and a device is enabled for the MAC Filter, then the device will be able to
connect. However, it can still be blocked using Connected Devices > Block or by disabling the
MAC Filter.