User's Guide

Table Of Contents
5G MiFi M2000 USER GUIDE 38
Guest Network Tab
The Wi-Fi guest network allows you to segregate traffic to a separate network rather than share access
to your Wi-Fi primary network. Use settings on this tab to set up or change Wi-Fi guest network
information. Connected devices must use the Wi-Fi settings shown on this screen to connect to the
guest M2000 Wi-Fi network.
NOTE: To turn the Wi-Fi guest network on, you must select at least one band for Guest Network under
Band Selection on the Wi-Fi Settings tab and then select Save Changes.
Guest network name (SSID): Enter a guest network name (SSID) to set up or change the guest
network name. The name can be up to 32 characters long.
Security: Select an option for Wi-Fi security:
WPA3/WPA2 Transition is the most secure method of Wi-Fi Protected Access and should be
used if possible for WPA2 and WPA3 compliant devices.
WPA2 Personal PSK (AES) can be used for WPA2 devices.
WPA/WPA2 Mixed Mode can be used if some of your older devices do not support WPA2.
None allows others to monitor your Wi-Fi traffic and use your data plan to access the Internet.
NOTE: Avoid using this option.
Password: Enter a Wi-Fi password, or you can use the Generate new password button.
Important: It is critical that you change the password from the default and use a different password
from your Admin or primary network password to keep the device and your network secure.