User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Touchscreen
- 3 Admin Website
- 4 Advanced Settings
- 5 Troubleshooting and Support
- Overview
- Common Problems and Solutions
- My M2000 powered off without pressing the Power button
- No service is available
- My M2000 has no power/touchscreen doesn’t display when I press the Power button
- I forgot my Wi-Fi password
- I forgot my M2000 Admin website password
- I cannot connect a device to my M2000
- I see the network name, but cannot connect a device to my M2000
- I want to see how many devices are connected
- I want to see the firmware (software) version installed on my M2000
- I want to see the phone number for my M2000
- I want to see the battery level of my M2000
- I want to turn my M2000 off
- I want to know if my M2000 is still on when the touchscreen is dark
- Technical Support
- 6 Product Specifications and Regulatory Information
- 7 Glossary
5G MiFi M2000 USER GUIDE 44
Preferences Tab
This tab allows you to configure options for the M2000 touchscreen, notification settings, and Web UI
display settings.
The Preference tab includes three sub tabs:
Device Preferences
Notifications
User Preferences
Device Preferences Sub Tab
Use this page to set options for the M2000 touchscreen.
USB mode when connected to a computer: Use the drop-down list to select the type of connection
you want for devices connecting to the M2000 USB-C port: USB charging, Internet access via USB and
Wi-Fi, or Internet access via USB only.
Prompt on USB connection: Check this box for a prompt to display on the M2000 screen when a
device connects via USB. The prompt allows selection of the USB mode of connection. NOTE: A USB
mode selection made on the M2000 touchscreen does not change the setting above. The setting
above acts as a default, and the choice on the M2000 touchscreen sets the mode for the current USB
session only.