User's Guide
Table Of Contents
- Cover Page
- Contents
- 1 Introduction and Getting Started
- 2 Touchscreen
- 3 Admin Website
- 4 Advanced Settings
- 5 Troubleshooting and Support
- Overview
- Common Problems and Solutions
- My M2000 powered off without pressing the Power button
- No service is available
- My M2000 has no power/touchscreen doesn’t display when I press the Power button
- I forgot my Wi-Fi password
- I forgot my M2000 Admin website password
- I cannot connect a device to my M2000
- I see the network name, but cannot connect a device to my M2000
- I want to see how many devices are connected
- I want to see the firmware (software) version installed on my M2000
- I want to see the phone number for my M2000
- I want to see the battery level of my M2000
- I want to turn my M2000 off
- I want to know if my M2000 is still on when the touchscreen is dark
- Technical Support
- 6 Product Specifications and Regulatory Information
- 7 Glossary
5G MiFi M2000 USER GUIDE 66
Manual DNS Tab
The M2000 automatically selects a Domain Name Server (DNS). This tab allows you to manually assign
up to two DNS IP addresses.
Turn on manual DNS: Check this box to manually select a DNS.
DNS 1 IP address: Enter the IP address for the primary DNS. This address is required to use the Manual
DNS feature.
DNS 2 IP address: Enter the IP address for the secondary (backup) DNS. This address is optional and
may be left blank if desired.
Click Save Changes.