User's Guide

Replacing the 4G LTE SIM Card

Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores your phone

number and important information about your wireless service. Your MiFi 8000 comes with the SIM

card and battery already installed.

To remove the 4G LTE SIM card:

➊ Insert your ngernail in the battery removal groove at the top edge of the battery cover,

then lift and remove the cover. Set the cover aside.

➋ Remove the battery from the battery well.

➌ Carefully slide the SIM card backwards to remove from the SIM card slot.

NOTE Should your 4G SIM card be lost or damaged, contact your network operator.

To install a new 4G LTE SIM card:

➊ Lift to open the battery cover located on the back of the MiFi 8000.

➋ If necessary, remove the SIM card from the outer card, being careful not to touch the gold-

colored contacts.

➌ Hold the card with the gold-colored contact points facing down.

➍ Insert the SIM card into the slot. The SIM card MUST remain in the SIM card slot when in use.

CAUTION! Do not bend or scratch your SIM card. Avoid exposing your SIM card to static

electricity, water, or dirt.