User's Guide

39
MAC Filter
The MAC Filter allows you to specify which devices can access the MiFi 8000 Wi-Fi network.
ON/OFF — Turns the MAC Filter ON/OFF. Before turning on, make sure that the Allowed Devices list
is not empty. When turning on, any Connected Device which is not in the Allowed Devices list will
immediately be disconnected.
• Refresh — Use to refresh the screen and delete any unsaved changes.
• Add Device — Use to add a new device to the devices list.
• Save Changes — Use to activate and save new settings.
To add a device to the device list:
➊ Click Add Device and enter the device name in the Name eld.
➋ Select the device type from the Type dropdown menu and the MAC Address in the MAC
Address field.
➌ Select the Blocked and/or MAC Address Filter check box as required, then click Save
Changes.
LAN
From LAN settings, you can manage your MiFi 8000’s network. These settings include:
• IPv4
• IP address — The IP address for the MiFi 8000.
• Subnet mask — The subnet mask network setting for the MiFi 8000. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
make sure you use the correct Subnet Mask for the IP address range containing the LAN
IP address.
• MAC address — The Media Access Controller (MAC) or physical address for the MiFi 8000.
• Turn On DHCP server — The Turn On DHCP Server checkbox turns the DHCP Server