User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Product Specifications and Regulatory Information
- Product Specifications
- Regulatory Information
- Federal Communications Commission Notice (FCC – United States)
- Innovation, Science and Economic Development Notice (ISED – Canada)
- ISED Canada ICES-003 Compliance
- FCC and ISED RF Exposure Guidance Statement
- Cellular External Antenna Considerations:
- RF Radiation Exposure Guidance Statement
- Radio Frequency and Transmitted Output Power Information
- Product Certifications and Supplier’s Declarations of Conformity
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- 5 Glossary
5G INDUSTRIAL GATEWAY S2000e USER GUIDE 22
Admin Password
The Admin password is what you use to sign into the S2000e. A default Admin password is assigned to
each individual device and is printed on the label of the device. You can change the Admin password
to something easier to remember, and set up a security question that will help you securely recover
your password if you forget what you changed it to.
Important: It is critical that you change the Admin password from the default to keep the device
and your network secure.
Changing the Admin Password
To change the Admin password:
1. Click the down arrow next to Sign Out in the top-right corner of any Web User Interface page and
select Change Password.
2. Enter your current Admin password, then enter a new password and confirm it.
3. Select a security question from the drop-down list and type an answer to question in the Answer
field. NOTE: Answers are case-sensitive.
4. Click Save Changes.
The next time you sign in to the S2000e, use the new Admin password. If you cannot remember the
password, click I forgot the Admin password. After you correctly answer the security question you
set up, the current password is displayed.