User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Product Specifications and Regulatory Information
- Product Specifications
- Regulatory Information
- Federal Communications Commission Notice (FCC – United States)
- Innovation, Science and Economic Development Notice (ISED – Canada)
- ISED Canada ICES-003 Compliance
- FCC and ISED RF Exposure Guidance Statement
- Cellular External Antenna Considerations:
- RF Radiation Exposure Guidance Statement
- Radio Frequency and Transmitted Output Power Information
- Product Certifications and Supplier’s Declarations of Conformity
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- 5 Glossary
5G INDUSTRIAL GATEWAY S2000e USER GUIDE 38
Viewing Info About the Gateway
On the Web UI Home page, the General Status panel shows current connection status and general
status information.
Model: The model of the device.
Technology: Indicates the current cellular data connection, for example, 5G Sub6.
Band: The band in use for the current connection.
WAN Status: The current status of the WAN connection.
SIM Status: The current status of the SIM card.
FW Version: The version of the firmware (software) currently installed on your S2000e.
IPv4: The network IP address of the S2000e.
IPv4: The Local-Link IPv6 address of the S2000e.
IMEI: The International Mobile Equipment Identity (IMEI) for your S2000e. This is a 15 digit code
used to uniquely identify an individual mobile station. The IMEI does not change when the SIM
is changed.
MAC Address: The Media Access Controller (MAC) Address for your S2000e. The MAC address is
a unique network identifier assigned when a network device is manufactured.
To view more detailed information about your S2000e and its use, select About from the Web UI side
menu).