User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Product Specifications and Regulatory Information
- Product Specifications
- Regulatory Information
- Federal Communications Commission Notice (FCC – United States)
- Innovation, Science and Economic Development Notice (ISED – Canada)
- ISED Canada ICES-003 Compliance
- FCC and ISED RF Exposure Guidance Statement
- Cellular External Antenna Considerations:
- RF Radiation Exposure Guidance Statement
- Radio Frequency and Transmitted Output Power Information
- Product Certifications and Supplier’s Declarations of Conformity
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- 5 Glossary
5G INDUSTRIAL GATEWAY S2000e USER GUIDE 51
To turn on automatic SIM switching or enter a SIM PIN, select Settings from the Web UI side menu.
Then select Advanced >SIM.
NOTE: The SIM card in your S2000e can be locked using a PIN. If the SIM card is locked, you must enter
the PIN before connecting to the mobile network. Once entered, the PIN is remembered until the next
shutdown. You may also need to provide the existing PIN to change a SIM. The default PIN is available
from your service provider.
SIM Management
Turn ON Automatic SIM Switching: Move the ON/OFF slider to ON to turn on automatic SIM
switching. When enabled, the SIM is switched automatically if the active SIM is disconnected. When
OFF, you can manually switch between SIMs and change SIM settings.
SIM Status
Active: Select the SIM you want to be active. NOTE: The change will take effect immediately.
SIM Slot: The SIM slot number.
IMSI: The International Mobile Subscriber Identity (IMSI) for your S2000e. This is a unique
number, usually fifteen digits, that identifies a Global System for Mobile Communications (GSM)
subscriber.
Carrier: The cellular carrier associated with the SIM.
Connection Status: The current status of the SIM.