User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Software Configuration
- 3 Advanced Settings
- 4 Product Specifications and Regulatory Information
- Product Specifications
- Regulatory Information
- Federal Communications Commission Notice (FCC – United States)
- Innovation, Science and Economic Development Notice (ISED – Canada)
- ISED Canada ICES-003 Compliance
- FCC and ISED RF Exposure Guidance Statement
- Cellular External Antenna Considerations:
- RF Radiation Exposure Guidance Statement
- Radio Frequency and Transmitted Output Power Information
- Product Certifications and Supplier’s Declarations of Conformity
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- 5 Glossary
5G INDUSTRIAL GATEWAY S2000e USER GUIDE 52
PIN Lock: If On, the PIN lock has been turned on, and the SIM PIN must be entered to connect
to the mobile network. If Off, the PIN lock feature is not turned on and the SIM PIN is not
required.
Priority: Indicates whether the SIM is Normal or Preferred priority.
Desired Action: The actions available depend on the SIM status. Possible operations include:
PIN Lock - If the SIM is currently PIN locked, you are prompted to enter the PIN.
NOTE: If an incorrect PIN is entered too many times, the SIM becomes PUK locked. A counter
indicates how many incorrect entries will cause PUK lock. Once PUK locked, the PUK must be
obtained from your service provider.
PUK Lock - If the SIM is currently PUK locked, the only operation possible is to enter the PUK.
NOTE: If an incorrect PUK is entered too many times, the SIM becomes permanently unusable.
You will need to obtain a new SIM. A counter indicates how many entry attempts remain.
Turn on PIN Lock - Sets the SIM so that entry of a PIN is required upon startup to connect to
the mobile network. To perform this operation, you must enter the current PIN.
Turn off PIN Lock - Turns off a PIN lock that was previously turned on so that entry of a PIN is
no longer required to connect to the mobile network. To perform this operation, you must
enter the current PIN.
Current PIN: Enter the current PIN. NOTE: The default SIM PIN is available from your service provider.
Click Save Changes.