User's Guide
Table Of Contents
- 1. Product Overview
- 2. UI Reference
- Support
- Admin Password
- Wi-Fi - Settings
- Wi-Fi – Primary Network
- Wi-Fi – Guest Network
- Wi-Fi – Wi-Fi as WAN
- Connected Devices
- Access Control - Devices
- Access Control - Schedules
- Settings - Preferences
- Settings – Software Update
- Settings – Backup and Restore
- Advanced Features – Lan
- Advanced Features – Network
- Advanced Features – Manual DNS
- Advanced Features – Firewall
- Advanced Features – MAC Filter
- Advanced Features – Port Filtering
- Advanced Features – Port Forwarding
- Advanced Features – WAN Configuration
- GPS - Status
- GPS - Local
- GPS - Remote
- GPIO
- VPN
- Remote Management
- About – General Status
- About – Primary WAN
- About - Ethernet WAN
- About – Wi-Fi as WAN
- About – System Status
- 3. Using, Testing, Troubleshooting
- 4. Regulatory Information
User Guide
Skyus 500 (Ninkasi)
Rev 1 Page 25 of 78
inseego.com
Advanced Features – Manual DNS
The Skyus 500 automatically selects a Domain Name Server (DNS). This tab allows you to
manually assign up to two DNS IP addresses.
Turn on manual DNS: Check this box to manually select a DNS.
DNS 1 IP address: Enter the IP address for the primary DNS. This address is required to use the
Manual DNS feature.
DNS 2 IP address: Enter the IP address for the secondary (backup) DNS. This address is optional
and may be left blank if desired.
Click Save Changes.