User's Guide
Table Of Contents
- 1. Product Overview
- 2. UI Reference
- Support
- Admin Password
- Wi-Fi - Settings
- Wi-Fi – Primary Network
- Wi-Fi – Guest Network
- Wi-Fi – Wi-Fi as WAN
- Connected Devices
- Access Control - Devices
- Access Control - Schedules
- Settings - Preferences
- Settings – Software Update
- Settings – Backup and Restore
- Advanced Features – Lan
- Advanced Features – Network
- Advanced Features – Manual DNS
- Advanced Features – Firewall
- Advanced Features – MAC Filter
- Advanced Features – Port Filtering
- Advanced Features – Port Forwarding
- Advanced Features – WAN Configuration
- GPS - Status
- GPS - Local
- GPS - Remote
- GPIO
- VPN
- Remote Management
- About – General Status
- About – Primary WAN
- About - Ethernet WAN
- About – Wi-Fi as WAN
- About – System Status
- 3. Using, Testing, Troubleshooting
- 4. Regulatory Information
User Guide
Skyus 500 (Ninkasi)
Rev 1 Page 33 of 78
inseego.com
GPS - Status
The Skyus 500 incorporates a GPS receiver. The GPS receiver can determine your current location,
often even indoors. Current location information can be shared with connected devices by using
the Local Streaming feature on the Local tab.
Use settings on this tab to enable or disable GPS and to view the current status of your GPS
connection.
Enable GPS Receiver
This setting enables or disables the GPS radio on your device. When the ON/OFF slider is ON, the
device acquires GPS and makes the data available to applications running on the device. When
OFF, no GPS data is available.
Status: The current status of your GPS connection. When searching, the device is making the
connection to satellites in order to populate GPS data.
Latitude: Latitude for the last location fix.
Longitude: Longitude for the last location fix.
Speed: Speed the device is traveling at.
Altitude: Altitude for the last location fix.
Accuracy: A measure of the accuracy of the horizontal position obtained by the GPS receiver.
Direction: Direction of North relative to the direction the device is traveling.