User's Guide

User Guide
Skyus 500 (Ninkasi)
Rev 1 Page 36 of 78
inseego.com
Select NMEA or TAIP. The available options for your selection are displayed. Select or de-select
any option. All options that are checked will be part of the packet routed to the remote server.
Reporting Triggers
• Time Interval — You can set a time interval to trigger when packets will be routed to the
remote server. For example, if you select 15 minutes, a GPS packet will be sent to the
remote server 15 every minutes.
Check the box if you want to use the time interval and enter a value between 5 and 60
minutes.
• Distance Interval — You can set a distance interval to trigger when packets will be
routed to the remote server. For example, if you select 1000 feet, a GPS packet will be
sent to the remote server every time your device moves 1000 feet.
Check the box if you want to use the distance interval and enter a value between 130 and
215009 feet.
NOTE: You can choose both Time and Distance as your interval specification. The device
will route packets based on which event occurs first.
• Stationary Timer — You can set a stationary timer that monitors for movement and only
route packets if the Skyus 500 is continuously moving within the time range. For example,
if you set this value to 1 minute and your router has not moved within 1 minute, a packet
will not be routed. Once your device begins registering GPS movement again, packet
routing will resume.
Check the box if you want to use the stationary timer and enter a value between 60 and
15300 seconds.
Click Save Changes to implement your settings or Cancel to cancel. You return to the Remote
page. The new remote server is now listed.
Use the View, Edit, and Delete buttons to view, edit, or delete listed remote servers.