User's Guide
Table Of Contents
- 1. Product Overview
- 2. UI Reference
- Support
- Admin Password
- Wi-Fi - Settings
- Wi-Fi – Primary Network
- Wi-Fi – Guest Network
- Wi-Fi – Wi-Fi as WAN
- Connected Devices
- Access Control - Devices
- Access Control - Schedules
- Settings - Preferences
- Settings – Software Update
- Settings – Backup and Restore
- Advanced Features – Lan
- Advanced Features – Network
- Advanced Features – Manual DNS
- Advanced Features – Firewall
- Advanced Features – MAC Filter
- Advanced Features – Port Filtering
- Advanced Features – Port Forwarding
- Advanced Features – WAN Configuration
- GPS - Status
- GPS - Local
- GPS - Remote
- GPIO
- VPN
- Remote Management
- About – General Status
- About – Primary WAN
- About - Ethernet WAN
- About – Wi-Fi as WAN
- About – System Status
- 3. Using, Testing, Troubleshooting
- 4. Regulatory Information
User Guide
Skyus 500 (Ninkasi)
Rev 1 Page 51 of 78
inseego.com
Logs
After SSH is enabled, use WinSCP to grab logs
Collect logread from console and Debuglogs from WebUI for all issues.
FOTA
Debuglogs from Web UI.
Before capturing the logs from Web UI, enable debug logs from NOTICE to DEBUG using
command
/bin/insg/mifi_debug_cli NUA debug.
logread |grep NUA from console
MULTIWAN
logread | grep -e firewall -e multiwan
mwan_info
cat /tmp/multiwan_info
MODEM
dmesg
WIFI and WIFI STATION
logread from console
debuglogs from WebUI
How to get storelogs.sh
SSH to device
/bin/insg/storelogs.sh --> Logs will be written to /opt/deviceos/tmp