User's Guide

User Guide
Skyus 500 (Ninkasi)
Rev 1 Page 65 of 78
inseego.com
ii. you should see this echo 0 >
/sys/class/gpio/gpio40/value
iii. if it is 0 then change it to 1 echo 1 >
/sys/class/gpio/gpio40/value (see screenshot
rclocal.PNG)
iv. save the file then open it again to make sure the
changes took effect
v. then reboot the device
vi. now telnet to the device, then enter “i2cget -y 0
0x42 0x00”
vii. if return 0xff then GPS is up
2. Now connect the Blue RF antenna in the GPS port, wait for couple of secs/minutesyou should
get GPS fixes (Orange LED will blink continuously)
NOTE:
make sure NOT to perform restore factory since the value will change back to 0 and you need to
follow the procedures again, soft reboot should be ok
RSA and IOTC
Refer to these documents:
1. For Remote Service Agent (RSA)
https://teams.microsoft.com/_?lm=deeplink&lmsrc=TeamsPOCSignIn#/xlsx/viewer/teams/h
ttps:~2F~2Finseego.sharepoint.com~2Fsites~2FSkyusPortfolio~2FShared%20Documents~2F
General~2FSW~2FTRD~2FDraft~2FRSA_TRD_10.12.xlsx?threadId=19:4e3c7fa012ad4647bc4
[e-mail]&baseUrl=https:~2F~2Finseego.sharepoint.com~2Fsites~2FSk
yusPortfolio&fileId=41A506E5-BEAC-4EDA-B7FB-
A8DA7B71B571&ctx=files&viewerAction=view
2. For IOT Connect
https://teams.microsoft.com/_?lm=deeplink&lmsrc=TeamsPOCSignIn#/docx/viewer/teams/
https:~2F~2Finseego.sharepoint.com~2Fsites~2FSkyusPortfolio~2FShared%20Documents~2
FGeneral~2FSW~2FTRD~2FDraft~2FIoTC~2FWI-
00038_Revision_1.0.docx?threadId=19:[e-mail]
&baseUrl=https:~2F~2Finseego.sharepoint.com~2Fsites~2FSkyusPortfolio&fileId=EA909891-
8FA2-47A2-9633-5816F72BF792&ctx=files&viewerAction=view
NOTE: Not all of them are relevant, Registering Single and Multiple Devices and Device removal
* cumulocity.com
o Building owner who maintains the server and the framework
* inseego.cumulocity.com