User's Guide
Table Of Contents
- 1. Product Overview
- 2. UI Reference
- Support
- Admin Password
- Wi-Fi - Settings
- Wi-Fi – Primary Network
- Wi-Fi – Guest Network
- Wi-Fi – Wi-Fi as WAN
- Connected Devices
- Access Control - Devices
- Access Control - Schedules
- Settings - Preferences
- Settings – Software Update
- Settings – Backup and Restore
- Advanced Features – Lan
- Advanced Features – Network
- Advanced Features – Manual DNS
- Advanced Features – Firewall
- Advanced Features – MAC Filter
- Advanced Features – Port Filtering
- Advanced Features – Port Forwarding
- Advanced Features – WAN Configuration
- GPS - Status
- GPS - Local
- GPS - Remote
- GPIO
- VPN
- Remote Management
- About – General Status
- About – Primary WAN
- About - Ethernet WAN
- About – Wi-Fi as WAN
- About – System Status
- 3. Using, Testing, Troubleshooting
- 4. Regulatory Information
User Guide
Skyus 500 (Ninkasi)
Rev 1 Page 68 of 78
inseego.com
Remote Service Agent
Supports 3 Data Traffic Modes:
(*) Enable = All traffic is routed at the check-in interval
Test Case: if all data points report to right network, track packet size
(*) Low Data Enable = A limited amount of information is routed at the check-in interval;
operations are enabled
Test Case: track packet size so we can estimate the data usage range for packet size
(*) Disable = No traffic is routed out or received from the remote server
Test Case: Send a request to device and ensure that there is absolute no traffic, packet size
must remain at 0