Data Sheet

Preliminary Data Sheet
April 23, 2020
Page 25/25
Document Ref: isp_ble_DS1907_R4.docx
Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com
BLE MODULE
ISP1907
8.7. Disclaimer
Insight SiP’s products are designed and manufactured for general consumer applications, so testing and
use of the product shall be conducted at customer’s own risk and responsibility. Please conduct validation
and verification and sufficient reliability evaluation of the products in actual condition of mounting and
operating environment before commercial shipment of the equipment. Please also pay attention (i) to apply
soldering method that don’t deteriorate reliability, (ii) to minimize any mechanical vibration, shock,
exposure to any static electricity, (iii) not to overstress the product during and after the soldering process.
The products are not designed for use in any application which requires especially high reliability where
malfunction of these products can reasonably be expected to result in personal injury or damage to the
third party's life, body or property, including and not limited to (i) aircraft equipment, (ii) aerospace
equipment, (iii) undersea equipment, (iv) power plant control equipment, (v) medical equipment,
(vi) transportation equipment, (vii) traffic signal equipment, (viii) disaster prevention / crime prevention
equipment.
The only warranty that Insight SiP provides regarding the products is its conformance to specifications
provided in datasheets. Insight SiP hereby disclaims all other warranties regarding the products, express
or implied, including without limitation any warranty of fitness for a particular purpose, that they are defect-
free, or against infringement of intellectual property rights. Insight SiP customers agree to indemnify and
defend Insight SiP against all claims, damages, costs and expenses that may be incurred, including without
any limitation, attorney fees and costs, due to the use of products.
8.8 Limited module procedures
-Not applicable
8.9 Trace antenna designs
-Not applicable
8.7. Disclaimer
Insight SiP’s products are designed and manufactured for general consumer applications, so testing and use of
the product shall be conducted at customer’s own risk and responsibility. Please conduct validation and verification and
sufficient reliability evaluation of the products in actual condition of mounting and operating environment before
commercial shipment of the equipment. Please also pay attention (i) to apply soldering method that don’t deteriorate
reliability, (ii) to minimize any mechanical vibration, shock, exposure to any static electricity, (iii) not to overstress
the product during and after the soldering process.
The products are not designed for use in any application which requires especially high reliability where malfunction
of these products can reasonably be expected to result in personal injury or damage to the third party's life, body or
property, including and not limited to (i) aircraft equipment, (ii) aerospace equipment, (iii) undersea equipment, (iv)
power plant control equipment, (v) medical equipment, (vi) transportation equipment, (vii) traffic signal equipment,
(viii) disaster prevention / crime prevention equipment.
The only warranty that Insight SiP provides regarding the products is its conformance to specifications provided in
datasheets. Insight SiP hereby disclaims all other warranties regarding the products, express or implied, including
without limitation any warranty of fitness for a particular purpose, that they are defect-free, or against infringement
of intellectual property rights. Insight SiP customers agree to indemnify and defend Insight SiP against all claims,
damages, costs and expenses that may be incurred, including without any limitation, attorney fees and costs, due to
the use of products.
Note- Additional testing, FCC Part 15 Subpart B disclaimer
The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the
grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to
the host not covered by the modular transmitter grant of certification.
The host product may need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order
to be properly authorized for operation as a Part 15 digital device.
8.8 Limited module procedures
-Not applicable
8.9 Trace antenna designs
-Not applicable
Specification subject to change without notice.