Quick Start Guide

STOP
Before using your new product, please
read these instructions to prevent any
damage.
Do not plug your power cord in until all
other devices have been connected.
QUICK SETUP GUIDE
43"/50"/55"/58"
60 Hz LED TV
4K ULTRA HD
NS43DF710NA19 / NS50DF710NA19 /
NS55DF710NA19 / NS58DF620NA20 /
NS50DF711SE21
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
TV stands
M4 screws (20 mm length) (4 pcs.)
Power cord
AA
A
+
+
AA
A
+
43"
50"
55"
STANDS
1 Align the TV stand screw holes
with the holes on your
TV’s bottom.
2 Use a Phillips screwdriver and
two provided screws to secure
each stand to your TV.
1
INSTALLING THE STANDS OR A WALL MOUNT
Place your TV face-down on a cushioned, clean surface.
L
R
43" TV shown
M4 × 20 mm screws
M4 × 20 mm screws
Power indicator
Remote control sensor
FEATURES
43" TV shown
A
V IN
VIDEO
AUDIO
LR
ANT/CABLE HDMI3ETHERNET
DIGITAL OPTICAL
OUTPUT
HDMI1
(ARC)
HDMI2
USB
USB
HDMI1
(ARC)
HDMI2
AUDIO OUT
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
VESA Mounting Pattern
200 × 200 mm
Screws: type M6, 12 mm to
15 mm length depending
on the wall mount
VESA Mounting Pattern
200 × 200 mm
Screws: type M6, 12 mm to
14 mm length depending
on the wall mount
VESA Mounting Pattern
300 × 200 mm
Screws: type M6, 12 mm to
14 mm length depending
on the wall mount
43" TV shown
50"
55"
58"
Note: Images do not necessarily represent the exact design
of your television.
AUDIO/VIDEO OUT
SOUNDBAR
SOUNDBAR
OPTICAL
AUDIO IN
AUDIO IN
L
R
AUDI
O
O
PTIONS
HDMI
O
PTI
O
N
S
HDMI (best video quality)
AV (good video quality)
AUDIO
OUT
DIGITAL
OPTICAL
OUTPUT
You can use the DIGITAL OPTICAL
OUTPUT jack or the HDMI 1 (ARC)
jack.
Note: If you need to change the
digital audio format, go to the Home
menu, select Settings, then select
Display & Sounds. Select Audio
Output, then select Digital Audio
Format and change the setting to
PCM or Dolby Digital.
Note: You can use a wired Ethernet connection to
access the internet, instead of a WiFi connection.
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
ANALOG
DIGITAL
2
Coaxial (good video quality)
ETHERNET (optional)
Connect an antenna to
access live over-the-air TV.
HD
HD
MAKING CONNECTIONS
ANT/CABLE
ETHERNET
HDMI3
HDMI2
HDMI1
(ARC)
ETHERNET
AV IN
VIDEO
AUDIO
LR
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
VESA Mounting Pattern
200 × 200 mm
Screws: type M6, 12 mm to
14 mm length depending
on the wall mount
43"
58"
NS-43_50_55DF710_58DF620NA20_50DF711SE21_19-0791_QSG_V6_EN.ai 1 12/31/2019 6:50:13 PM