User Manual

NS-HAWHP2

www.insigniaproducts.com

Specifications

Cannot pair the

headphones

• Shorten the distance between the docking station

and your headphones.

• Make sure that the docking station is in pairing

mode. Press and hold the pairing button for five

seconds to re-enter pairing mode.

• Turn on the docking station, then place the

headphones onto the station. They will enter

autopairing mode (this may take 2-20 seconds).

Tip: If the power indicators on the headphones and docking

station continue to blink after 20 seconds, they are no longer

paired to each other. If this happens, follow these steps:

1 Make sure that the headphones and docking station

are within range of each other (ideally in the same

room).

2 Turn off the headphones and the docking station.

3 Turn on both the headphones and the docking

station. The lights will initially blink, then they light

solid blue when connected.

Headphone dimensions

(H x W x D)

7.5 x 3.0 x 6.7 in. (191.2 x 76.8 x 171.2 mm

Docking station

dimensions (H x W x D)

8.5 x 3.8 x 4.7 in. (214.7 x 96.5 x 119.9 mm)

Input AC 100-240V~ 50/60 Hz 0.3 A

Output 5V, 500mA

Battery life Up to 10 hours

Range 33 feet (10 m)

Charging time 2 hours

Audio resolution 48 Khz @ 24 bits

Audio Source Ports Analog: RCA

Digital: Optical PCM (does not support DTS and

Dolby Audio)

Problem Solution