Quick Start Guide

POWER OVERHEAT
OVERLOAD
On/Auto Rev
O
SETTING UP YOUR SHREDDER
1 Push the wheels into the holes on the bottom of your shredder.
2 Place the wastebasket securely in the shredder.
Note: Do not use plastic bags to line the wastebasket.
3 Connect the power cord to a power outlet.
PACKAGE CONTENTS
• Micro cut shredder with wastebasket
• Quick Setup Guide
FEATURES
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
10-sheet Micro Cut
Shredder
NS-PS10MC/NS-PS10MC-C
# ITEM
1 Disc slot
2 LED indicators
3 Paper/Credit card
slot
4 Switch
5 Window
6 Wastebasket
7 Wheels
DESCRIPTION
For CDs and DVDs. Insert one at a time.
POWER: Lights when the shredder is in use.
OVERLOAD: Lights when trying to shred over
the maximum 10 sheets, or paper is folded.
OVERHEAT: Lights when the shredder has
overheated. If this light is on, unplug the
shredder and let it cool for at least 50 minutes.
Insert up to 10 sheets of paper at a time or one
credit card at a time.
On/Auto (
|
): Shreds an item when inserted
into the paper or disc slot, then stops when it is
nished shredding.
O (): Turns o the shredder.
Rev (): Reverses the paper to clear a jam or
remove unshredded paper.
Allows you to see when the wastebasket is full.
Empty when 2/3 full.
Allows you to easily move your shredder.