Quick Start Guide

2 Align the intake tube on the back of the frame with the mouth of
the inator pump, then wrap the attached strap around the
mouth of the pump and attach tightly.
Attaching the screen
• Connect the clips along the edges and corners of the frame to the
screen.
Inating the screen
After making sure that the air intake is clear of obstructions and the
frame’s zipper is closed completely, plug the pump’s power cord into
a power outlet. The pump turns on automatically.
Note: The pump must be left running while screen is in use.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
114" Inflatable
Outdoor Screen
NS-SCR117
Flat size (W×H): 21.2 × 11 in. (538.48 × 279.4 mm.)
Folded size (W×H): 5.3 × 11 in. (134.62 × 279.4 mm.)
• Tethers (4 long, 4 short)
• Pump stakes (2)
• Storage bag
• Quick Setup Guide
Setting the screen upright
1 Attach the four long tethers to the upper X-shaped straps on each
side of the frame (two on each side).
2 Attach the four short tethers to the lower X-shaped straps on each
side of the frame (two on each side).
3 Stand the inatable screen upright, then insert the yellow tether
stakes through the tethers and use the hammer to pound them
into the ground. Make sure that the tethers are taut.
4 Insert the two orange pump stakes through the plastic legs of the
pump, use the hammer to pound them into the ground, to secure
the pump to the ground.
Top Bottom
Intake tube
Pump stakes
Long tethers
Top Bottom
Short tethers
Top Bottom
Tether stakes
PACKAGE CONTENTS
• Projector screen
• Inatable frame
• Pump
• Tether stakes (14)
YOU’LL NEED
• Hammer
• Projector
• Sound system (Built-in projector speakers may not provide loud
enough audio outdoors.)
FEATURES
SETTING UP YOUR SCREEN
Attaching the pump
1 Lay the screen on top of the deated frame with the white side up.
Note: Select a location where the pump is well-ventilated and the power
cord can reach a power outlet.
Frame
Screen
Tethers
Pump
Tether stakes
Pump stakes
NS-SCR117_18-0617_QSG_V1_EN.ai 1 12/17/2018 3:33:59 PMNS-SCR117_18-0617_QSG_V1_EN.ai 1 12/17/2018 3:33:59 PM
V1
FINAL
FOR PRINT