User Guide 39" LED TV NS-39D310NA15 Before using your new product, please read these instructions to prevent any damage.
Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 29 Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Automatically adjusting the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Setting the power on picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
f CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 2 3 4 5 6 7 8 9 10 11 12 13 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
NS-39D310NA15 Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition. 1 Antenna lead-in wire 2 Grounding clamp Antenna discharge 3 unit 4 Grounding conductors Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.
Insignia 39" LED TV Insignia 39" LED TV Introduction Roku Ready® Congratulations on your purchase of a high-quality Insignia product. Your NS-39D310NA15 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. MHL™ Connect your MHL-enabled device, such as a cell phone or Roku Streaming Stick™, and view your device’s screen on your TV. Supports 1080p HD video and 5.1 digital surround sound playback from your mobile device.
NS-39D310NA15 Insignia 39" LED TV Installing the stand or wall-mount bracket Notes • If you plan to wall-mount your TV, do not install the stand. • Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand 1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Find the front of the stand, then secure the stand to the stand column using the four provided 20 mm screws.
Insignia 39" LED TV Installing a wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 76.) 1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the stand column to the TV. 3 Remove the stand column. 6 www.insigniaproducts.
NS-39D310NA15 Insignia 39" LED TV 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Notes • The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. • The mounting holes on the back of your TV take type M6 screws. 7.87 in. (200 mm) 7.87 in.
Insignia 39" LED TV TV components Right side buttons Package contents • • • • • 39" LED TV Remote control and batteries (2 AAA) TV stand and screws (4) Quick Setup Guide Important Information Front # Item 1 MENU # Item 1 Power indicator Remote control 2 sensor Description Turns off when your TV is on. Lights red when your TV is off (standby mode). Receives signals from the remote control. Do not block. 2 INPUT 3 VOL+/VOL– 4 CH S/CH T 5 POWER 8 www.insigniaproducts.
NS-39D310NA15 Insignia 39" LED TV Left side jacks # Item 1 AUDIO OUT/ 2 HDMI 1/ARC 3 HDMI 2/MHL 4 USB www.insigniaproducts.com Description Connect headphones, a sound bar, analog audio amplifier, or a home theater system to this jack to listen to TV audio through external speakers. For more information, see “Using analog audio” on page 33. Connect an HDMI device to this jack. For more information, see “Using HDMI (best)” on pages 13, 19, 25, or 28.
Insignia 39" LED TV Back # Item 1 DIGITAL OUTPUT (Optical) 2 AUDIO L and R Y/VIDEO, PB, PR 3 OR Y/VIDEO 4 ANT/CABLE IN 5 SERVICE PORT 6 PC AUDIO IN 10 www.insigniaproducts.com Description Connect a sound bar, digital audio amplifier, or home theater system to this jack to listen to TV audio through external speakers. For more information, see “Using digital audio” on page 32. Connect the audio for a component video device to these jacks.
NS-39D310NA15 Insignia 39" LED TV Remote control # Button 10 FAVORITE Press to open the Favorite channel list. See “Setting up a favorite channel list” on page 57 and “Viewing a favorite channel” on page 57. 11 Media controls INlink—Press to control INlink-compatible (HDMI CEC) devices. See “Using INlink” on page 44. USB—Press to control a photo slideshow. See “Viewing photos in a slideshow” on page 50. —Press to control a movie or show that is streaming through a connected Roku Streaming Stick.
Insignia 39" LED TV What connection should I use? Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device to the best available connection.
NS-39D310NA15 Insignia 39" LED TV Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 12. Using HDMI (best) Side of TV On your TV HDMI cable HDMI cable connector HDMI jack Cable or satellite box 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
Insignia 39" LED TV Using DVI (same as HDMI but requires an audio connection) Side of TV On your TV HDMI cable connector HDMI cable with HDMI-DVI adapter 3.5mm audio connector 3.5mm RCA stereo audio cable HDMI jack PC AUDIO IN jack Cable or satellite box Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
NS-39D310NA15 Insignia 39" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV Component video cable connectors RCA audio cable Analog audio cable connectors Component video cable Component video jacks Analog audio jacks Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
Insignia 39" LED TV Using AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green Y/VIDEO jack. On your TV AV (composite video) cable connector Analog audio cable connectors AV (composite video) jack Analog audio jacks Cable or satellite box AV cable (composite video cable) Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
NS-39D310NA15 Insignia 39" LED TV Using coaxial (good) On your TV Cable or satellite box Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack on the cable or satellite box.
Insignia 39" LED TV Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. 3 Plug your TV’s power cord into a power outlet, then turn on your TV.
NS-39D310NA15 Insignia 39" LED TV Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 12. Using HDMI (best) Side of TV On your TV HDMI cable HDMI cable connector HDMI jack DVD or Blu-ray player 1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
Insignia 39" LED TV Using DVI (same as HDMI but requires an audio connection) Side of TV On your TV HDMI cable connector HDMI jack 3.5mm RCA stereo audio connector PC AUDIO IN jack HDMI cable with HDMI-DVI adapter DVD or Blu-ray player 3.5mm RCA stereo audio cable Back of TV 1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
NS-39D310NA15 Insignia 39" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player On your TV Component video cable connectors Analog audio cable connectors RCA audio cable Component video cable Component video jacks Analog audio jacks Back of TV 1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
Insignia 39" LED TV Using AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green Y/VIDEO jack. DVD or Blu-ray player On your TV AV (composite video) cable connector Analog audio cable connectors AV (composite video) jack Analog audio jacks AV cable (composite video cable) Back of TV 1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
NS-39D310NA15 Insignia 39" LED TV Connecting a Roku Streaming Stick You can connect a Roku Streaming Stick® to your TV to enjoy streaming video and audio. Note You must use the purple HDMI 2/MHL jack to connect a Roku Streaming Stick. Side of TV Roku Streaming Stick 1 Plug the Roku Streaming Stick (not provided) into the purple HDMI 2/MHL jack on the side of your TV. 2 If your TV is turned on, press ENTER when a message appears. Your Roku Streaming Stick’s menu opens.
Insignia 39" LED TV Connecting an MHL-enabled device You can connect an MHL-enabled device, such as a cell phone, and view your device’s screen on your TV. Note You must use the purple HDMI 2/MHL jack to connect an MHL-enabled device. On your TV Side of TV HDMI cable connector HDMI 2/MHL jack 1 2 3 4 MHL cable MHL-enabled device Connect the small connector on an MHL cable (not provided) to the micro USB port on the MHL-enabled device.
NS-39D310NA15 Insignia 39" LED TV Connecting a game console Using HDMI (best) Side of TV On your TV HDMI cable HDMI cable connector HDMI jack Game console 1 Make sure that your TV’s power cord is unplugged and the game console is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the game console. 3 Plug your TV’s power cord into a power outlet, then turn on your TV.
Insignia 39" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. Game console On your TV Component video cable connectors Console-specific component video and audio cable Analog audio cable connectors Component Analog video jacks audio jacks Back of TV 1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
NS-39D310NA15 Insignia 39" LED TV Using AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green Y/VIDEO jack. On your TV Game console AV Analog audio (composite cable video) cable connectors connector AV (composite video) jack Console-specific AV cable (composite video cable) Analog audio jacks Back of TV 1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
Insignia 39" LED TV Connecting a computer Using HDMI (best) Side of TV On your TV HDMI cable HDMI cable connector HDMI jack 1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the computer. 3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer. 4 Press INPUT to open the INPUT SOURCE list.
NS-39D310NA15 Insignia 39" LED TV Using DVI (same as HDMI but requires an audio connection) Side of TV On your TV HDMI cable connector HDMI cable with HDMI-DVI adapter 3.5mm audio cable connector 3.5mm audio cable HDMI jack PC AUDIO IN jack Back of TV 1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the computer.
Insignia 39" LED TV Connecting a USB flash drive Side of TV USB flash drive 1 Plug a USB flash drive into the USB port on the side of your TV. Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive. 2 If your TV is turned on when you connect the USB flash drive, press S or T to select Yes in the message that appears. The PHOTOS menu opens.
NS-39D310NA15 Insignia 39" LED TV Connecting headphones When you connect headphones, the TV speakers are muted. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound. Side of TV 1 Connect the headphones to the AUDIO OUT/ jack on the side of your TV. 2 In the screen that opens, press W or X to highlight Headphone, then press ENTER. For more information, see “Selecting the audio out mode” on page 54.
Insignia 39" LED TV Connecting a basic home theater system You can connect a home theater system or sound bar to the digital audio jack. Using digital audio On your TV Home theater system Digital optical audio cable connector Sound bar Digital optical audio cable Digital optical audio jack Back of TV 1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
NS-39D310NA15 Insignia 39" LED TV Using analog audio When you connect a home theater system or sound to the AUDIO OUT/ jack, the TV speakers are muted. Side of TV On your TV 3.5mm audio cable connector Home theater system Sound bar 3.5mm RCA stereo audio cable AUDIO OUT/ jack 1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off. 2 Connect a 3.
Insignia 39" LED TV Connecting a home theater system with multiple devices DVD or Blu-ray player Cable or satellite box AV receiver Game console USB flash drive Antenna or cable TV connected directly to the wall jack Computer The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information. Just remember to use the best connection types available for the best picture and sound.
NS-39D310NA15 Insignia 39" LED TV Connecting power • Connect the AC power cord to a power outlet. Caution • Your TV should only be operated from the power source indicated on the label. • Always unplug the AC power cord from the power outlet when you will not be using your TV for an extended period of time. • The power cord is permanently attached to your TV. Do not try to unplug it from the back of your TV. www.insigniaproducts.
Insignia 39" LED TV Using the remote control Cautions • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. • Make sure that batteries are disposed of correctly. Do not burn or incinerate.
NS-39D310NA15 Insignia 39" LED TV Turning on your TV for the first time The first time you turn on your TV, the TV SETUP wizard opens. The wizard guides you through setting up basic settings including the menu language, time setting, picture mode, TV signal source, and the channel list. 1 Make sure that you have: • Installed the remote control batteries. (See page 36 for details.) • Connected an antenna, cable TV, or satellite TV. (See page 13 through 18 for details.) • Connected the power cord.
Insignia 39" LED TV 15 Press S or T to highlight Antenna, Cable, or Satellite Box, then press ENTER. A If you select Antenna, your TV scans for available channels. The scan may take several minutes. B If you select Cable, a message asks if you have a cable box: Note You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list. • Select No, then press ENTER if no cable box is connected. Your TV scans for available channels.
NS-39D310NA15 Insignia 39" LED TV C If you select Satellite Box, a message asks how you connected the satellite box to your TV: Understanding the basics Turning your TV on or off 1 Make sure that the power cord is connected to a power outlet. 2 Press (power) to turn on your TV. The power indicator turns off. 3 Press (power) again to turn off your TV. Your TV enters standby mode, and the power indicator turns red.
Insignia 39" LED TV On-screen menu overview SETTINGS menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. • Menu items that are not selectable are grayed out. • Menus in this manual are described in TV mode, unless otherwise indicated. • The screens shown in this manual are for explanation purposes and may vary from the actual screens on your TV.
NS-39D310NA15 Insignia 39" LED TV Selecting a channel Viewing channel information • Press CH or CH to go to the next or previous channel on the memorized channel list. • Press the number buttons to enter the channel number you want, then wait for the channel to change or press ENTER to immediately change the channel. • To select a digital sub-channel, press the number buttons to select the main digital channel, press (sub-channel), then press the number button for the sub-channel.
Insignia 39" LED TV Using a Roku Streaming Stick 3 Use the following buttons to navigate on your Roku Streaming Stick: You can connect a Roku Streaming Stick and enjoy streaming video and audio. Note • You can purchase a Roku Streaming Stick at www.bestbuy.com, www.bestbuy.ca, or www.futureshop.ca. • You must use the purple HDMI 2/MHL jack to connect a Roku Streaming Stick. Navigate Roku screens. Close a menu or video. Connecting and using 1 Connect a Roku Streaming Stick to your TV.
NS-39D310NA15 Insignia 39" LED TV Switching back to the Roku Streaming Stick • Press (home). OR Press INPUT, press S or T to select HDMI 2 (Roku), then press ENTER. Using an MHL-enabled device You can connect your MHL-enabled device, such as a cell phone, and view your device’s screen on your TV. Note You must use the purple HDMI 2/MHL jack to connect an MHL-enabled device. Connecting and using OR Press MENU, then press W or X to highlight STREAMING, then press ENTER.
Insignia 39" LED TV Switching back to a connected device 1 Press INPUT, then press S or T to select HDMI 2 (MHL/ACC). Using INlink INlink lets you control HDMI CEC-compatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV. To use INlink, you must set the INlink Control setting on the SETTINGS · INLINK menu to On. Notes • HDMI cables must be used to connect HDMI CEC-compatible devices to your TV. • The connected device’s HDMI CEC feature must be turned on.
NS-39D310NA15 Insignia 39" LED TV Turning Device Auto Power Off on or off Turning TV Auto Power On on or off When INlink is set to On, Device Auto Power Off automatically turns off HDMI CEC devices when you turn off your TV. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. TV Auto Power On automatically turns on your TV when an HDMI CEC device is turned on, if the device has this feature. 1 Press MENU. The on-screen menu opens.
Insignia 39" LED TV Turning Audio Receiver on or off Displaying a list of INlink-compatible devices When INlink is turned on and you have connected a HDMI CEC-compatible audio receiver to your TV, turning on Audio Receiver lets you use your TV’s remote control to control the volume on the audio receiver. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. You can display a list of HDMI CEC devices that are connected to your TV.
NS-39D310NA15 Insignia 39" LED TV Waking INlink-compatible devices When a connected INlink-compatible device is turned off (in standby mode), Connect wakes (turns on) the device. When a connected INlink-compatible device is turned on and you switch to a different video input source (such as TV), Connect switches to the device. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
Insignia 39" LED TV Using a USB flash drive You can connect a USB flash drive to your TV to view compatible JPEG pictures. Browsing photos 1 Switch to USB mode. See “Switching to USB mode” on page 48. The PHOTOS menu opens. Notes • Never remove the USB flash drive or turn off your TV while viewing JPEG pictures. • The JPEG picture viewer only supports JPEG format images (with “.jpg” file extensions) and not all JPEG files are compatible with your TV.
NS-39D310NA15 Insignia 39" LED TV When a photo is displayed full-screen, a control bar appears at the bottom of the photo. The file name, picture resolution, size, and date are displayed on the bottom of the control bar. If you do not press a button within 10 seconds, the control bar closes. Press INFO to open the control bar again. 4 To navigate on the photo screen, press: • W to go to the previous photo. • X to go to the next photo. • ENTER to rotate the photo clockwise.
Insignia 39" LED TV Viewing photos in a slideshow Customizing slideshow settings You can view your photos in a slideshow. 1 Switch to USB mode. See “Switching to USB mode” on page 48. The PHOTOS menu opens. 2 If the photos you want to view are in a folder on the USB flash drive, select the folder. For information about selecting a folder, see “Browsing photos” on page 48 or “Viewing favorite photos” on page 49. 3 Press MENU. The PHOTOS menu opens again.
NS-39D310NA15 Insignia 39" LED TV Adjusting the picture Adjusting the TV picture You can adjust various settings to improve the quality of the TV picture. Also, you can reset all picture settings to the factory default. 1 Press MENU. The on-screen menu opens with the PICTURE menu displayed. 2 Press T or ENTER to access the menu. 3 Press S or T to highlight an option, then press ENTER to access the option. You can select: • Picture Mode—Selects the picture mode.
Insignia 39" LED TV • Overscan—Extends text and images past the screen edges to hide edge artifacts. You can select On or Off. • Dynamic Backlight (DCR)—Enhances the contrast ratio between light and dark areas of the picture. You can select Off, Low, or High. • Color Temperature—Selects the color temperature. You can select Cool (to enhance the blues), Normal, or Warm (to enhance the reds). • Noise Reduction—Selects the noise reduction mode to reduce picture noise (snow).
NS-39D310NA15 Insignia 39" LED TV Adjusting the sound Adjusting sound settings You can adjust sound settings to improve the sound quality. You also can reset all sound settings to the factory default. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight AUDIO, then press T or ENTER. The AUDIO menu opens. 3 Press S or T to highlight an option, then press ENTER to access the option. You can select: • Sound Mode—Selects the sound mode. You can select: • Standard—Balances treble and bass.
Insignia 39" LED TV Selecting the audio out mode 54 Playing TV audio only If your TV is on when you connect a device to the AUDIO OUT/ jack on the side of your TV, a screen opens where you select which audio out mode you want to use. 1 Connect headphones, an amplifier, a home theater system, or a sound bar to the AUDIO OUT/ jack on the side of your TV. The following screen opens. You can turn off the picture on your TV and listen to the program audio only. 1 Press MENU. The on-screen menu opens.
NS-39D310NA15 Insignia 39" LED TV Changing channel settings Note You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list. Automatically scanning for channels When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH or CH , your TV goes to the next or previous channel in the channel list.
Insignia 39" LED TV C If you select Satellite Box, a message asks how you connected the satellite box to your TV: • Select HDMI, Component, or AV, then press ENTER if you connected a satellite box to your TV using one of these cables. Read the message, then press ENTER to close the wizard. • Select Coaxial, then press ENTER if you connected a satellite box to your TV using a coaxial cable. Read the message, then press ENTER to start the channel scan (VHF channels only).
NS-39D310NA15 Insignia 39" LED TV Setting up a favorite channel list Adding or changing a channel label You can create a favorite channel list so you can quickly browse through your favorite channels by pressing FAVORITE, then selecting a channel from the favorite channel list. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens. 3 Press S or T to highlight Favorites, then press ENTER. The CHANNELS · FAVORITES screen opens.
Insignia 39" LED TV Checking the digital signal strength You can check the digital signal strength to determine if you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens. 3 Press S or T to highlight Parental Controls, then press ENTER. The Enter password screen opens.
NS-39D310NA15 Insignia 39" LED TV Locking control buttons Blocking unrated TV When the button lock is turned On, the buttons on the side of your TV are locked, and you can only operate your TV using the remote control. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 3 Press S or T to highlight Parental Controls, then press ENTER. The Enter password screen opens. 4 Press the number buttons to enter the four-digit password.
Insignia 39" LED TV Setting parental control levels You can set parental controls for the U.S. and Canada. U.S. rating levels U.S.
NS-39D310NA15 Insignia 39" LED TV 5 Press S or T to highlight USA Parental Locks, then press ENTER. (To set Canadian ratings, select Canadian Parental Locks.) USA Parental Locks Downloading rating information If the program you are viewing has downloadable rating information, you can download the information to use when setting parental controls. Note If the program you are viewing does not have RRT5 rating information, RRT5 is grayed on the SETTINGS · PARENTAL CONTROLS menu and cannot be selected.
Insignia 39" LED TV 5 Press S or T to highlight RRT5, then press ENTER. The SETTINGS · PARENTAL CONTROLS · RRT5 screen opens. The screen that opens may vary depending on the broadcaster. Using closed captioning Closed captioning displays a text version of the TV program audio or displays information provided by the broadcaster. Turning closed captioning on or off 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
NS-39D310NA15 Insignia 39" LED TV Selecting the analog closed captioning mode Selecting the digital closed captioning mode Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text version of the TV program audio in a small banner. The other CC modes display information provided by the broadcaster. The Text modes display information in a box that covers half of the screen. 1 Press MENU. The on-screen menu opens.
Insignia 39" LED TV Customizing digital closed captioning settings 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 3 Press S or T to highlight Closed Caption, then press ENTER. The SETTINGS · CLOSED CAPTION menu opens. 5 Press ENTER, then press S or T to select Custom. 6 Press S or T to highlight an option, then press ENTER. You can select: • Size—Selects the font size. • Font—Selects the font style.
NS-39D310NA15 Insignia 39" LED TV Adjusting time settings 4 Press S or T to highlight Date/Time, then press ENTER. The SETTINGS · TIME · DATE/TIME menu opens. When you set up your TV for the first time, the clock was set up. If you move your TV to a different time zone, you need to reset the clock to the correct time. Setting the clock 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
Insignia 39" LED TV Setting the sleep timer You can specify the amount of time before your TV automatically turns off. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. Adjusting menu settings Selecting the menu language Your TV can display the on-screen menu in English, French, or Spanish. When you set your TV up for the first time, the language was selected. You can change the menu language to a different language. 1 Press MENU.
NS-39D310NA15 Insignia 39" LED TV Labeling an input source Turning Input Sensor on or off You can add a label to an input source to make it easier to identify. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. When the Input Sensor feature is turned on, your TV automatically detects which video jacks have devices connected to them and turned on.
Insignia 39" LED TV Troubleshooting Viewing system information You may need to view system information during troubleshooting. 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. Warning Do not try to repair your TV yourself. Contact authorized service personnel. Restoring settings to the defaults When you restore default settings, all the settings you have customized (including parental controls) are reset. 1 Press MENU.
NS-39D310NA15 Insignia 39" LED TV Video and audio Problem Problem Solution Picture does not fill the screen. There are black bars around the picture. • Change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9). See the “Aspect Ratio” option in “Adjusting the TV picture” on page 51. No picture (screen is not lit) and no sound. • Press POWER on the TV or on the remote control. • Make sure that the Audio Only option is set to Off.
Insignia 39" LED TV Problem Solution Problem Only snow (noise) appears on the screen. • Try another channel. The station may be experiencing problems. • Make sure that the antenna or cable TV is connected correctly and securely. See “Connecting a cable or satellite box” on page 13 or “Connecting an antenna or cable TV (no box)” on page 18. • If you are using an antenna, the digital channel signal may be low.
NS-39D310NA15 Insignia 39" LED TV Problem Good picture, but no sound. Poor picture. Solution Problem • Increase the volume. • Make sure that the sound is not muted. • Make sure that you do not have headphones connected. When headphones are connected, no sound comes from the TV speakers. • Change to a different audio mode. • If you are using a home theater system or sound bar, make sure it is turn on and is not muted.
Insignia 39" LED TV General Problem Problem Solution No power. • Make sure that the power cord is correctly connected to your TV and a power outlet. • Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV. • Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference.
NS-39D310NA15 Insignia 39" LED TV Roku Streaming Stick Problem I cannot see a picture on my TV. I cannot hear sound. I cannot connect to my wireless network. Problem Solution • Make sure that your TV is turned on. • Make sure that the Roku Streaming Stick is securely connected to the purple HDMI 2/MHL jack. See “Connecting a Roku Streaming Stick” on page 23. • Make sure that the you have selected HDMI2 (Roku) as the video input source. See “Selecting the video input source” on page 39.
Insignia 39" LED TV Problem INlink (CEC-compatible) device Solution My TV is playing the audio from a connected device but is not displaying the video. • Make sure that the cables are securely connected. • Make sure that you are using an MHL cable. An MHL cable may be difficult to identify. It may look like a micro USB-to-HDMI cable because the cable connectors are the same, but the cable itself is thinner. The cable also may not be labeled MHL. • Try adjusting the picture settings on your TV.
NS-39D310NA15 Insignia 39" LED TV Problem My TV’s remote control does not control the device. The device does not show up in the INlink Device list. My device does not turn off when I turn off my TV. Solution Problem • Make sure that there are no obstructions between the remote control and the remote control sensors on your TV and the device. • Depending on the device, all the buttons may not work. • Make sure that the INlink feature is turned on. See “Turning INlink on or off” on page 44.
Insignia 39" LED TV Specifications Outputs Specifications are subject to change without notice. Dimensions and weight Without stand With stand 34.6 × 20.8 × 3.5 in. (87.9 × 52.8 × 8.8 cm) 15.2 lbs. (6.9 kg) 34.6 × 22.6 × 8.5 in. (87.9 × 57.4 × 21.5 cm) 17.0 lbs. (7.
NS-39D310NA15 Insignia 39" LED TV Programming universal remote controls Common universal remote control codes You can operate your Insignia TV with a new or existing universal remote control. 1 See the table in “Common universal remote control codes” on page 77 for common codes. If you have problems programming your remote or need a different remote control code: • Contact the universal remote control or cable/satellite company of the remote control you are trying to program • Visit www.insigniaproducts.
Insignia 39" LED TV Legal notices Dolby License Notice and Trademark Acknowledgement Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NS-39D310NA15 Insignia 39" LED TV One-year limited warranty Insignia Televisions Definitions: Insignia Products ("Insignia") warrants to you, the original purchaser of this new Insignia-branded television ("Product"), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product ("Warranty Period").
www.insigniaproducts.com (877) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2014 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
