User manual

23
Connected Blu-Ray Disc Player
www.insigniaproducts.com
Other playback problems
Specifications
Specifications are subject to change without notice.
System and outputs
General
Video file requirements (USB/DISC)
Video file compatibility with your player is limited
as follows:
Available resolution size: 1920x1080 (W x H) pixels
File extensions: .wmv
Playable Audio format: Dolby Digital , DTS , MP3 ,
WMA , AAC , AC3
Sampling frequency: within 32 to 48kHz (WMA),
within 16-48kHz (Mp3)
Bit rate: within 20-320kbps (WMA), within
32-320kbps (Mp3)
CD-R/RW, DVD R/RW, BD-R/RE Format: ISO
9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder: Less than 2000. The movie
file name and subtitle are limited to 180
characters.
Not all of the WMA and AAC Audio formats are
compatible with your player.
HD movie files contained on a 1.0/1.1 CD or USB
flash drive may not play correctly. Blu-ray, DVD, or
USB 2.0 are recommended to play back HD movie
files.
Your player does not support files that are
recorded with GMC (Global Motion
Compensation) or Qpel (Quarter pixel). Those are
video encoding techniques in MPEG4 standard,
like DivX or XVID.
MP3/WMA audio file requirement (USB/DISC)
File extensions: .mp3, .wma
Sampling frequency: Within 8 to 48kHz (WMA),
within 11 to 48kHz (Mp3)
Bit rate: Within 8-320kbps (WMA, Mp3)
CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
Depending on the size and number of the
MP3/WMA files, it may take several minutes to
read the contents of the media.
Your player does not support the ID3 Tag
embedded in the MP3 file.
The total playback time indicated on the screen
may not correct be for VBR files.
Problem Solution
Audio and video pause momentarily
This happens when your
player is changing chapters
in a playlist.
When playing a disc that is
recorded on both layers,
audio and video may pause
when your player is
changing layers.
Blu-ray Disc or DVD does not play
Make sure that the disc has
the correct region code.
Check the rating on the disc.
You may have set parental
controls to block that rating.
Some Blu-ray discs will only
play over an HDMI
connection.
Picture-in-Picture (PIP) does not work
on a Blu-ray Disc
Make sure that the disc
supports PIP mode.
No subtitles
•Turn on subtitles. See
“Selecting the subtitle
language” on page 12.
Make sure that the disc was
recorded with subtitles. If
the disc has subtitles, a
subtitle option should
appear on the disc’s menu.
Cannot change the viewing angle
Some discs are not recorded
with multiple viewing
angles. Check the
documentation that came
with the disc.
Not all scenes on a disc have
multiple viewing angles.
Check the documentation
that came with the disc.
Resume function does not work
•If you press (stop) twice,
the resume information is
erased.
Some discs do not support
the resume function.
Media BD-ROM, BD-JAVA 1.1, DVD-Video,
DVD+RW/+R, DVD-RW/-R, CD-RW/-R
TV signal system NTSC
Video output Electric level output: 1.0 Vp-p
Resistance: 75S
Output connector: Pin jack (1 system)
Component video (Y, CB,CR) Y output level: 1.0 Vp-p Resistance: 75
PB output level: 0.7 Vp-p Resistance: 75
PR output level: 0.7 Vp-p Resistance: 75
Output connector: Pin jack (Y: green,
PB: blue, PR: red)(1 set)
Output format: 480i, 480p, 720p, 1080i
Audio output (analog) Output level: 2 Vrms (1 kHz, 0 dB)
Output connector: Pin jack
Number of connectors: 2 channel (1)
Audio output (digital) Optical digital output (1)
Coaxial digital output (pin jack) (1)
Audio performance (frequency
response)
DVD (linear audio):
4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
CD-Audio: 4 Hz to 20 kHz
S/N ratio: 90 dB
Dynamic range: 80 dB
Total harmonic distortion: 0.004%
HDMI output Output format: 480i, 480p, 720p,1080i,
1080p
Output Connector: Type A (19 pin)
Power 110V-120V ~ 50/60Hz
Power consumption 25 W
Dimensions
L×W×H
16.93 × 10 × 2.17 inches
(430 × 254 × 55 mm)
Weight 6.39 lbs. (2.9 kg)
Operating temperature 41°F to 95°F (5°C to 35°C)
Operating humidity 10% to75%