User manual

2
NS-WBRDVD Connected Blu-Ray Disc Player
www.insigniaproducts.com
Connected Blu-Ray Disc Player
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-WBRDVD represents the
state of the art in Blu-ray Disc player design and is
designed for reliable and trouble-free performance.
Features
• Full high-definition video playback at up to 1080p
resolution for an amazing viewing experience.
• Upconversion of standard definition DVDs for
enhanced picture quality at up to 1080p over an
HDMI connection.
•Deep color
• Rich multi-channel surround sound.
• Easy and simple HDTV connection using a single
HDMI cable (cable not included).
• Multiple outputs for connecting your home
theater system or amplifier.
• PIP functionality that lets you display primary and
secondary video at the same time (if available on
the Blu-ray Disc).
• Pop-up menu display without interrupting
playback (if available on the Blu-ray Disc).
• HDMI 1080p/fps output (Blu-ray Disc only) that
provides smooth playback of video with a frame
rate of 60 frames per second (TV must be
connected with an HDMI cable and be compatible
with an HDMI cable and be compatible with
1080p 60 frame).
Package contents
• Blu-ray Disc player
•A/V cable
• Remote control
• AAA batteries (2)
•User Guide
Front
Back
# Item Description
Disc tray
Insert a disc with the label side up into this tray. To
open or close the tray, press (open/close).
VFD screen
Displays status information.
Remote control sensor
Receives signals from the remote control. Do not block.
(open/close)
Press to open or close the disc tray.
NS-WBRDVD
1
3
4
5
6
2
7
8
9
1
2
3
4
(previous)
Press to go to the previous title, chapter, or track.
(stop)
Press to stop playback. The Setup menu is displayed.
To resume playback, press or to select
DVD/BD-ROM, then press ENTER. Depending on the
disc, playback starts where it stopped or at the
beginning of the disc.
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
(play/pause)
Press to start or pause playback.
(next)
Press to go to the next title, chapter, or track.
(standby/on)
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
# Item Description
Power connector
Plug the power cord into a power outlet.
WiFi antenna
Sends and receives signals from a wireless access point
or router.
VIDEO OUT
Connect a TV to this jack and to the AUDIO OUT L/R
jacks using a composite video cable (provided).
COMPONENT VIDEO OUT
Connect a TV to these jacks and to the AUDIO OUT L/R
jacks using a component video cable and audio cable.
AUDIO OUT L/R
Connect the audio for a composite TV or component
video TV to these jacks.
HDMI
Connect a TV to this jack using an HDMI cable. An
HDMI cable carries both video and audio. You do not
need to make an audio connection.
ETHERNET
Connect an ethernet cable to this jack and to a
broadband Internet jack to download BD-Live
information.
OPTICAL DIGITAL OUT
Connect an optical digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
COAXIAL DIGITAL OUT
Connect an coaxial digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
USB port
Connect a USB flash drive to this port.
# Item Description
5
6
7
8
9
HDMI ETHER NET
COAXIAL
OPTI C AL
DIGI TAL OUT
USB
DVD-Vi deo
Blu-ray
3181372
C
U
S
CONFORMS TO
UL
STD. 60065
CER TIF IED TO
CSA
STD. C22.2
N
o. 60065
R
T
E
E
T
K
N
I
CM
VIDEO L R
Y
CB / P B CR / PR
COMPONENT VI DEO OUT
VIDEO OUT AUDIO OUT
S/N:
MODEL: NS-WB RDVD
AC: 110V -120V~ 50/60Hz
BLU-RAY DISC PLAYER
POWER: 25W
MADE IN CHINA
Manufactured for Insignia Products
7601 Penn A ve S . R ic hfiel d, M N 55423 US A
CLASS 1 LASE R PRODUCT
This device complies with part 15 of
the FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must acc ept any inter-
ference received, including inter-
ference that may cause undes ired
operation.
This device complies with 21 CFR chapter 1,
subchapter J. Applicable at the date of
manu f a c ture .
U.S . Pa tent N os. 6,836,549; 6,381,747;
7,050,698; 6,516,132; and 5,583, 936.
RISQUE CHOC ELECTRIQUE NE
PAS OUVR IR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Manufactured under license under
U.S. P atent #'s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,
535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S . and wor ldwi de
patents is sue d & pe nding. DTS is a
registered trademark & the DTS logos
and Symbol are trademarks of DTS,
Inc . 1996- 2008 DTS , I nc. All Right s
Reserved.
FCC ID:
Manufactured under license from Dolby La-
boratories. Dolby and the double- D symbol
are trademarks of Dolby Laboratories.
Manufactured:
1
3
4
6
7
2
10
5
9
8
1
2
3
4
5
6
7
8
9
10